Recently installed the harvest, however Grafhana graph is not ight, netapp-harvest.conf is configured two filer. one 7-mde and another is AFF CDOT.
I could find the graph but it does not show which sytem is belongs too. example in the group I could not drop down the menu, attaches the screen shot.
Not sure something wrong with netapp-harvest.conf file.
cat /opt/netapp-harvest/netapp-harvest.conf
##
## Configuration file for NetApp Harvest
##
## This file is organized into multiple sections, each with a [] header
##
## There are two reserved section names:
## [global] - Global key/value pairs for installation
## [default] - Any key/value pairs specified here will be the default
## value for a poller should it not be listed in a poller section.
##
## Any other section names are for your own pollers:
## [cluster-name] - cDOT cluster (match name from cluster CLI prompt)
## [7-mode-node-name] - 7-mode node name (match name from 7-mode CLI prompt)
## [OCUM-hostname] - OCUM server hostname (match hostname set to system)
## Quick Start Instructions:
## 1. Edit the [global] and [default] sections and replace values in all
## capital letters to match your installation details
## 2. For each system to monitor add a section header and populate with
## key/value parameters for it.
## 3. Start all pollers that are not running: /opt/netapp-harvest/netapp-manager start
##
## Note: Full instructions and list of all available key/value pairs is found in the
## NetApp Harvest Administration Guide
##
#### Global section for installation wide settings
##
[global]
#grafana_api_key = INSERT_LONG_KEY_HERE
#grafana_url = INSERT_URL_OF_GRAFANA_WEB_INTERFACE_HERE
grafana_api_key = eyJrIjoiQUYzSlpYOVM0c2hwb21GZ1NucERtanlabngwT2pOelgiLCJuIjoibmV0YXBwLWhhcnZlc3QiLCJpZCI6MX0=
grafana_url = http://172.134.45.14:3000
##
#### Default section to set defaults for any user created poller section
##
[default]
#graphite_server = INSERT_IP_OR_HOSTNAME_OF_GRAPHITE_SERVER_HERE
graphite_server = 170.134.45.14
username = netapp-harvest
password = PAXXXXX
## If using ssl_cert (and not password auth)
## uncomment and populate next three lines
# auth_type = ssl_cert
# ssl_cert = INSERT_PEM_FILE_NAME_HERE
# ssl_key = INSERT_KEY_FILE_NAME_HERE
##
#### Poller sections; Add one section for each cDOT cluster, 7-mode node, or OCUM server
#### If any keys are different from those in default duplicate them in the poller section to override.
##
[KRDFG]
hostname = 172.134.45.10
group = KM
[KRDFG2]
hostname = 172.134.35.20
group = KM2
# [INSERT_OCUM_SERVER_NAME_HERE]
# hostname = INSERT_IP_ADDRESS_OR_HOSTNAME_OF_OCUM_SERVER
# group = INSERT_GROUP_IDENTIFIER_HERE
# host_type = OCUM
# data_update_freq = 900
# normalized_xfer = gb_per_sec
I could not find something wrong the logs.
------------------------------------------------
attaching polling log file for refernces
2017-01-27 14:52:38] [NORMAL ] [main] Poller will use [password] authentication with username [netapp-harvest] and password [**********]
[2017-01-27 14:52:38] [NORMAL ] [main] Collection of system info from [172.134.4 .10] running [NetApp Release 8.2.4P5 7-Mode] successful.
[2017-01-27 14:52:38] [NORMAL ] [main] Found best-fit monitoring template (same generation and major release, minor same or less): [7dot-8.2.0.conf]
[2017-01-27 14:52:38] [NORMAL ] [main] Added and/or merged monitoring template [ /opt/netapp-harvest/template/default/7dot-8.2.0.conf]
[2017-01-27 14:52:38] [NORMAL ] [main] Metrics will be submitted with graphite_r oot [netapp.perf7.KRDCG]
[2017-01-27 14:52:38] [NORMAL ] [main] Using graphite_meta_metrics_root [netapp. poller.perf7.KM.KRDCG]
[2017-01-27 14:52:38] [NORMAL ] [main] Startup complete. Polling for new data e very [60] seconds.
-----------------------------------------------------
2017-01-27 14:52:38] [NORMAL ] [main] Poller will use [password] authentication with username [netapp-ha rvest] and password [**********]
[2017-01-27 14:52:39] [NORMAL ] [main] Collection of system info from [172.134.35.20.] running [NetApp Rel ease 8.3.2] successful.
[2017-01-27 14:52:39] [NORMAL ] [main] Found best-fit monitoring template (same generation and major rele ase, minor same or less): [cdot-8.3.2.conf]
[2017-01-27 14:52:39] [NORMAL ] [main] Added and/or merged monitoring template [/opt/netapp-harvest/templ ate/default/cdot-8.3.2.conf]
[2017-01-27 14:52:39] [NORMAL ] [main] Metrics will be submitted with graphite_root [netapp.perf.KRDFG2]
[2017-01-27 14:52:39] [NORMAL ] [main] Using graphite_meta_metrics_root [netapp.poller.perf.KRDFG2]
[2017-01-27 14:52:39] [NORMAL ] [main] Startup complete. Polling for new data every [60] seconds.
-------------------------
attahced the screen shot, group I could not pull down the menu.
