Active IQ Unified Manager Discussions

netapp-harvest not showing data on some dashboards

axsys
5,434 Views

Hey Guys,

 

We've recently installed harvest and are collecting data but for some reason only some Dashboards show results:

 

NetApp Dashboard: Cluster
NetApp Dashboard: Cluster Group

NetApp Dashboard: SVM

NetApp Dashboard: Node

 

All the other NetApp "Detail" Dashboards are empty? I did try and search stuff online and in the harvest administration guide but can't find anything.

In particular it would be handy to get volume information like for example inodes. There's nothing on SVM/Node/Cluster level.

Any help for documentation or ideas how to 'enable' this would be very useful!

 

Thank you,

axsys

1 ACCEPTED SOLUTION

axsys
5,181 Views

Heya,

I figured it out... it hasn't had to do with anything in graphite or the configuration it's the interpretation on Grafana is what was wrong. You will need to use a wild card (*) in the search on the netapp-detail dashboards... for example when adding this:

 

search.png

The top 5 resources of every group, cluster, svm, volume you are pulling data with harvest will display.
Going on forward you will have to work with *Groupname*, *Clustername* or Clustername*, *svmname* or svmname*, *volumename* or volumename*... pick & choose just does not work with the 'NetApp Detail' Dashboards, compared to the other Harvest Dashboards where it actually does work. 

So my filter for getting the information of a specific volume was:

detail-search.png

View solution in original post

5 REPLIES 5

axsys
5,425 Views

https://github.com/Oxalide/netapp-harvest-influxdb we are using this as basis... so it might be correlating to that. Would the .json need to be updated to get the information into the other Dashboards?

PabloZorzoli
5,333 Views

I don't think Harvest specifically collects inodes counts.

axsys
5,323 Views

I see.. so where would I see what we're pulling of the netapp with harvest? apart from checking Graphite? I don't seem to find this information 😕
Also why don't I see 'detail' dashboards.. they're just empty?

 

Cheers,

axsys

PabloZorzoli
5,276 Views

Did you change the metrics config settings as in graphite_root? if you change that, bear in mind that the grafana dashboards would need to be modified to find the metric in the right graphite path

axsys
5,182 Views

Heya,

I figured it out... it hasn't had to do with anything in graphite or the configuration it's the interpretation on Grafana is what was wrong. You will need to use a wild card (*) in the search on the netapp-detail dashboards... for example when adding this:

 

search.png

The top 5 resources of every group, cluster, svm, volume you are pulling data with harvest will display.
Going on forward you will have to work with *Groupname*, *Clustername* or Clustername*, *svmname* or svmname*, *volumename* or volumename*... pick & choose just does not work with the 'NetApp Detail' Dashboards, compared to the other Harvest Dashboards where it actually does work. 

So my filter for getting the information of a specific volume was:

detail-search.png

Public