My FAS8200 is running SP firmware 5.8, IQ unified manager reports "Event: Downrev SP/BMC Firmware Is Exposed To A Potential Bug" . Bug 1243613 doesn't applicable to my system. Even though, I manually tried to check the switch version as said in the bug report. Command not available on my system (cDoT 9.7p8)
::*> sp switch-version
Error: "switch-version" is not a recognized command
Is Active IQ reporting correctly? Has anyone seen this before? I never trusted any reports from Active IQ. I opened case also sometime ago about security vulnerability reporting before.
You will need to run the "sp switch-version" command from the SP context and not the Cluster shell, which is why you received the error of "Error: "switch-version" is not a recognized command". This applies to the rest of the commands in the public report for bug 1243613. Keep in mind you also must enable "diag" privileges at the SP shell using "priv set diag".
Here is an example from a lab system:
SP fas8200-lab-test1> priv set diag
Warning: These diagnostic commands are for use by support personnel only.
SP fas8200-lab-test1*> sp switch-version
Version11 SB_XXII ETHSW RZL
Here is also a link to all the fixes in SP 5.9: SP 5.9 Fixes