Hi Team,   On checking the AIQ digital advisor for an ASA A50 cluster, observed that for on the cluster the node level statistics are unavailable. However, for the other customer it seems to be working fine. Any suggestions on this seen behaviour? Is there any fix ?   (Attachments redacted) ... View more

Hi All,   I have a question. Actually, i'm working with a FAS2240-4 with ontap 7-mode with a DS4246 disk shelf. The Controller B was down by a insoncistence aggr0 and WALF.  We able to rescue and recovery the data from aggr0.  At the moment, the controller A is serving  production data (LUNs) to VMWare hosts.    We need to reuse the controller B and i'm searching NetApp documentation and found the use of boot menu --> op 4 " Clean configuration and initialize all disks".   Before to perform this activity, I need to confirm that this operation only clean and initialize owned disks by controller B and the disks owneb by controller A will be secures.   The disks owned by controller B are in DS4246 (all 24 disks), and disks from controller B are inside of FAS2240-4 chasis.  Thanks in advance  ... View more

Have several customers that are having this issue, I thought it may be related to upgrading to 9.15.1P3, but it appears on other versions I know were working correctly.   When you go to ActiveIQ suggestions I get the following errors.   Chrome = Cannot read properties of undefined (reading 'forEach')   Firefox = a[0].results.risks is undefined   Support suggested restarting the vserver service sysmgr but no luck. ... View more

Hi, My team uses ActiveIQ Performance data to analyze current ONTAP workloads. If we download the data, you can check the recording every hour. My team would like to know specifically how the log data is aggregated and recorded for this hourly recording. If anyone knows how to record this hourly data, could you please tell me? Thanks Kenji Kang ... View more