I’m trying to get snapdrive working a HPUX 11.31 Itanium. I using running SnapDrive 4.1.1 and fcp host utilities 4.3. I have other luns on this host to the same filer not though SnapDrive working working fine. I am using ALUA as the multipathing and I did enable it ALUA on the igroup.
I also sent the multipathing in the SnapDrive.conf as PVLINKS is this correct?
uxwpeng8:/opt/NetApp/snapdrive# snapdrive storage create -lun 54.18.108.6:/vol/oradb1/test -lunsize 10m
LUN 54.18.108.6:/vol/oradb1/test ... created
mapping new lun(s) ... done
discovering new lun(s) ... *failed*
Cleaning up ...
- LUN 54.18.108.6:/vol/oradb1/test ... deleted
0001-476 Admin error: Unable to discover the device associated with 54.18.108.6:/vol/oradb1/test. If multipathing in use, there may be a possible multipathing configuration error.
Please verify the configuration and then retry
sanlun lun show -p
uswsnssan1b:/vol/oradb2/lun36 (LUN 31)
Agile Filename: /dev/rdisk/disk204
17.0g (18254659584) lun state: GOOD
Filer_CF_State: Cluster Enabled Filer Partner: uswsnssan1a
Multipath_Policy: None
Multipath_Provider: None
-------- --------- -------------------- ------ ------- --------
host filer primary partner
path path /dev/dsk host filer filer
state type filename HBA port port
-------- --------- -------------------- ------ ------- --------
up primary /dev/dsk/c23t3d7 td0 0a
up primary /dev/dsk/c21t3d7 td1 0b
up secondary /dev/dsk/c25t3d7 td2 0b
up secondary /dev/dsk/c27t3d7 td3 0a
