Data Backup and Recovery
To achieve NDMP, tape library (quantum scaler i500) is zoned with fc switches using nexus 5k to FAS2552 cluster ontap.
However tape library is not discovered in netapp.
::>storage tape show
This table is currently empty.
zone has been mapped with pwwn as follows
vsan 1: pwwn of 0c node1, first pwwn of scaler i500
vsan 1: pwwn of 0c node2, first pwwn of scaler i500
vsan 2: pwwn of 0d node1, second pwwn of scaler i500
vsan 2: pwwn of 0d node2, second pwwn of scaler i500
Can someone please shed some light?
See The Solution
Is the port type an initiator??
If it is initiator, disable port of switch and enable it.
View solution in original post
Thanks for the reply. Looks like zoned fc ports are set to target... I guess that was the problem.
Let's walk you through the new & improved Knowledge Base and further enrich your experience with NetApp Products.
Join our Discord Community