renaming volume and lun igroup qtree

[TDUBB1234]

I need to rename my volume, lun, qtree and igroup

but the lun is mapped and online

how should i do this?

[baijulal · Accepted solution]

Correcting my post - no need to offline the volume, Scott is correct

[TDUBB1234]

ok i got it. i was able to do it with some rename and mv commands

the volume stayed online while i did it. there does not seem to be an issue

[scottgelb]

You can dynamically rename.. even with NAS as long as auto export update is on for nfs... cifs automatically changes shares to the new path.  For LUNs you can rename all including the volume, qtree, lun and igroup... see example below in my vsim.  I create a volume/qtree/lun/igroup called "test" then rename each to "test2".  I would be careful with snapdrive interaction and snapmanager too but the renames are done with now outage.

fas6280> vol create test aggr1 2g

Creation of volume 'test' with size 2g on containing aggregate

'aggr1' has completed.

fas6280> qtree create /vol/test/test

fas6280> lun create -s 32m -t windows /vol/test/test/test.lun

lun create: created a LUN of size:   39.2m (41126400)

fas6280> igroup create -i -t windows test iqn.1991-05.com.microsoft:win-oqjy6cd3mns

fas6280> lun map /vol/test/test/test.lun test

fas6280> Fri Dec 16 21:30:44 GMT [fas6280:lun.map:info]: LUN /vol/test/test/test.lun was mapped to initiator group test=0

RENAMES

fas6280> vol rename test test2

Fri Dec 16 21:32:38 GMT [fas6280:wafl.vvol.renamed:info]: Volume 'test' renamed to 'test2'.

'test' renamed to 'test2'

fas6280> priv set advanced

Warning: These advanced commands are potentially dangerous; use

         them only when directed to do so by NetApp

         personnel.

fas6280*> qtree rename /vol/test2/test /vol/test2/test2

fas6280*> lun move /vol/test2/test2/test.lun /vol/test2/test2/test2.lun

fas6280*> igroup rename test test2

fas6280*> lun show -m

LUN path                            Mapped to          LUN ID  Protocol

-----------------------------------------------------------------------

/vol/test2/test2/test2.lun          test2                   0     iSCSI

[TDUBB1234]

thanks. I see you went into priv mode to rename a qtree.

do I need to do that? I was able to use mv to rename the qtree

[scottgelb]

Mv does the same thing.. but using the qtree command is my preference. Rename is only in advanced mode.

[timdanner]

Scott,

If we didn't use qtrees will this rename process still work if I omit the step to rename the qtree?  I'm looking to rename the underlying volume, and then the lun that was created with 'snap drive' app.

[ryanbeaty]

Go ape crazy. I rename volumes all of the time. Clients like to name volumes with crazy upper and lower case letters which drives me crazy because I live in CLI. igroups are mainly for human reference. The LUN mappings are by iqn or WWPN, igroups are just a way for us to logically combine things. Rename igroups whenever you want. LUN renames will be automatically detected by SnapDrive. You can even create a qtree, and move a LUN into or out of a qtree while online. SnapDrive is good at handling these path changes. Like Scott mentioned, just make sure if it is an NFS export that it is exported after the rename.