adding an azuze cvo svm to CI

[StevenRuby]

i have read through the KBs and verified connectivity but every time i get this:
Connector is in error state. Service name: audit. Reason for failure: No local IP address found on the connector that can reach the data interfaces of the SVM.

[Ontapforrum]

Have you checked this?
https://docs.netapp.com/us-en/cloudinsights/task_add_collector_svm.html#before-you-begin
Under 'Troubleshooting' - Go to: "No local IP address found on the connector that can reach the data interfaces of the SVM”."

https://kb.netapp.com/?title=Advice_and_Troubleshooting%2FCloud_Services%2FCloud_Insights%2FCloud_Secure_Data_Collector_in_error_%2527No_local_IP_addr...

[StevenRuby]

yes i have read that.
i see communications in the packet trace so there is no firewall issues.

[Raisa]

For adding CVO, please allow ICMP and TCP traffic for the agent VM and CVO.

[StevenRuby]

ICMP and TCP are allowed

[aladd]

If the protocols are allowed and we still see the error state, I might suggest opening a technical case. As this issue is typically due to firewall config, Cloud secure or other networking issues.

[ttran]

Hi @StevenRuby ,

Did you resolve the issue or have you engaged NetApp Technical Support?

Regards,

Team NetApp