init failed on failed disk replacement
2017-08-10 12:07 PM
Im pretty green and still learning alot about netapp, had a disk fail, So i replaced it with a disk i already had unowned. i have done this only a few times, but this one is giving me
Broken Details:: init failed
If i Command line in, it will say FAILED under Pool
Any thing i should try or maybe another disk?
Thanks in advanced.
1 REPLY 1
Re: init failed on failed disk replacement
2017-08-11 01:04 AM
please check the disk compatibility. Please refer a similar discussion: https://community.netapp.com/t5/Data-ONTAP-Discussions/Disk-replacement-init-failed-no-physical-data/m-p/128555#M27878
If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO.