EF & E-Series, SANtricity, and Related Plug-ins

Need Recommendations for configuring an E-2860 to use with Veeam Backup and Replication 9.5

BGL
4,731 Views

Hello , 

 

We are new owner of an E-2860 Netapp E-Series . 

We use Veeam Backup & Replication 9.5 in the followed Environment : 

 

1 x OneNode Metrocluster FAS8020 connected via 10Gbit copper to the Veeam Backup Server ( W2016 Server ) 

1 x E-Series 2860 with 78 x 8TB SAS HDDs 5 x 800 GB SSD for SSD Cache.

E-Series is connected via H221 HBA ( 6Gbit ) SAS to the Veeam Backup Server ( W2016 )  

We create on the E-Series 4 dynamic Disk Pools ( Every with 11 Disks ) , in every Pool we create only one Volume ( Workload : other ) 

This Volumes are 4 Disks on the Windows Server. 

Every, from the 4 Veeam Backup to Disk Jobs own at the Moment one of the 4 Repositorys ( Volumes from E-Serie ) 

On the Backup Server there are also 4 LTO7 Tape Drives connected via SAS . 

On the Weekend there will be produced an so called "synthesized Full Backup to Tape" 

https://helpcenter.veeam.com/backup/80/vsphere/synthetic_backup.html

In the Past we use an FAS2554 as Backup Storage. With this FAS the synthesized Backup to Tape needs very long time. But the Tape Drive was not the Bottleneck. We Backup to Tape with 80MB/s from the FAS2554. 

 

 

What we want now is : 

 

- Configuration of the E-Series for the best Backup Performance for Backups from Metrocluster to E-Series over the Backup Server . 

- Best Performance for synthetic Operations initiated from Veeam on the E-Series . 

- Best Backup Speed for Backup to Tapes. 

 

Thanks for Suggestions about the Configuration of the E-Series. Or is our Solution with 4 Pools with four Volumes per Pool the best Solution ? 

1 ACCEPTED SOLUTION

NetApp_AU
3,429 Views

Hello BGL,

 

This guide should give you guidance on setting up your systems.

 

E-Series and EF-Series Reference Architecture and Storage Best Practices with Veeam Backup & Replication 9.5

 

Team NetApp

View solution in original post

3 REPLIES 3

thaddad
3,486 Views

when you first had to add the ESeries storage to Veeam, what category under "Add Storage" under the Storage Infrastructure" did you use?   WE have same ESeries model...

 

Thanks

NetApp_AU
3,430 Views

Hello BGL,

 

This guide should give you guidance on setting up your systems.

 

E-Series and EF-Series Reference Architecture and Storage Best Practices with Veeam Backup & Replication 9.5

 

Team NetApp

thaddad
3,417 Views
Thanks. Guide provided good help.


Tom Haddad
Senior Storage Administrator
ENCOVA INSURANCE
400 Quarrier Street
Charleston, Wv 25301
encova.com
tom.haddad@encova.com
304-941-1000 x55214
[cid:image001.png@01D7252E.5F067120]


Important notice: This message may contain confidential information intended exclusively for the recipient named above. If you have received this email in error, or if you are not the intended recipient, please promptly delete and destroy the original email transmission. Any unauthorized use, dissemination, distribution or duplication of this email message is strictly prohibited. Thank you for your assistance.
Public