minimum number of drives required for the E2800.

[tokion]

What is the minimum number of drives required for the E2800? RAID creation is not assumed.

The reason for this question is that when four HDD drives are installed, the following warning is recorded every 24 hours.
「"May 8, 2025 1:55:54 PM","Warning","Controller","Shelf 99, Bay A","Insufficient storage or drive count for autocode synchronization image","9730","3307","0/0/0","Error","A"」
thanx

[ahmadm]

Two to three drives is generally the minimum for capacity and redundancy purposes.

You may verify that all these drives are healthy in UI, or in eos shell using vdmShowDriveList.

[tokion]

I was given the password and checked it.
I don't think there's any problem with each HDD drive.
Thanks.

======================================
-> vdmShowDriveList
Total Drives: 4

DriveAddr Devnum T/S Secure PI Med BlkFmt State Ord/VG# Vols WWN
=====================================================================================================================
0x000000011ee352f0 0x00010000 99/1 No 2 HDD 512e Acc/UnA/Opt 5000c500bbe845e30000000000000000
0x000000011ee3d960 0x00010003 99/4 No 2 HDD 512e Acc/UnA/Opt 5000c500bbe898af0000000000000000
0x000000011ee38360 0x00010001 99/2 No 2 HDD 512e Acc/UnA/Opt 5000c500bbe8a4230000000000000000
0x000000011ee3ae90 0x00010002 99/3 No 2 HDD 512e Acc/UnA/Opt 5000c500bc2c7b7b0000000000000000

value = 1 = 0x1
->
======================================

[tokion]

I can't verify this on the Lenovo DE series because I can't log into the shell (passwd unknown).
thanks

[tokion]

When 5 drives are installed, the following message is output, and no more warning messages are output.
[Autocode synchronization drive image write started]
[Autocode synchronization drive image write completed]
Therefore, I think 5 drives is the minimum number, but this is just my speculation.

Customer would like to install 3 drives, but based on the above, I cannot say YES.

[tokion]

This is only an issue with dual controllers.
In this state, a dual-head swap (replacement of a dual controller) is not possible because there are no DACStore ACS (AutoCode Sync) images and there is not enough free space in the available DACStore.

Considering this, the minimum number of drives is 5.

However, if even one drive is missing, the controller cannot be replaced, so we recommend that you have a sufficient number of drives.

[tokion · Accepted solution]

Conclusion:
For dual controllers you need at least 5 drives.
We're constrained to relatively small regions per drive, so it takes several drives to accommodate the entire set of images required for ACS purposes.

Thanx.