Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Mute
- Printer Friendly Page
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Bonjour,
J'ai essayé d'augmenter la taille d'un Lun sur une NetApp E2800 mais j'ai l'opération avec un Progress de 10jours
Solved! See The Solution
1 ACCEPTED SOLUTION
ttran has accepted the solution
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
If you are working with a volume group that uses RAID5 or RAID6, that is probably correct. It can take a very long time and you cannot interrupt it once it is started. If increasing LUN (volume) size is something you will need to do on a regular basis, I would suggest reconfiguring your array to use DDP. Then increasing the size of a LUN is very fast. This is one of the reasons DDP was created, to allow for dynamic (easy) expansion of the pool size and the volume sizes among other things.
1 REPLY 1
ttran has accepted the solution
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
If you are working with a volume group that uses RAID5 or RAID6, that is probably correct. It can take a very long time and you cannot interrupt it once it is started. If increasing LUN (volume) size is something you will need to do on a regular basis, I would suggest reconfiguring your array to use DDP. Then increasing the size of a LUN is very fast. This is one of the reasons DDP was created, to allow for dynamic (easy) expansion of the pool size and the volume sizes among other things.