FAS and V-Series Storage Systems Discussions

There are not enough spare disks. /aggr0/plex0/rg2:

msantander

Hi everyone,

 

I'm in a big truoble. I've got 4 spare disks, but my raid i degraded. How can I solve this?

 

I'm using FAS3020 wits system 7.2.6

 

NETAPP> sysconfig -r
Aggregate aggr0 (online, raid_dp, degraded) (block checksums)
  Plex /aggr0/plex0 (online, normal, active)
    RAID group /aggr0/plex0/rg0 (normal)

      RAID Disk Device  HA  SHELF BAY CHAN Pool Type  RPM  Used (MB/blks)    Phys (MB/blks)
      --------- ------  ------------- ---- ---- ---- ----- --------------    --------------
      dparity   0c.16   0c    1   0   FC:B   -  ATA   7200 423111/866531584  423889/868126304
      parity    0c.18   0c    1   2   FC:B   -  ATA   7200 423111/866531584  423889/868126304
      data      0a.21   0a    1   5   FC:A   -  ATA   7200 423111/866531584  423889/868126304
      data      0c.17   0c    1   1   FC:B   -  ATA   7200 423111/866531584  423889/868126304
      data      0c.28   0c    1   12  FC:B   -  ATA   7200 423111/866531584  423889/868126304
      data      0a.26   0a    1   10  FC:A   -  ATA   7200 423111/866531584  423889/868126304
      data      0c.25   0c    1   9   FC:B   -  ATA   7200 423111/866531584  423889/868126304
      data      0c.24   0c    1   8   FC:B   -  ATA   7200 423111/866531584  423889/868126304
      data      0c.23   0c    1   7   FC:B   -  ATA   7200 423111/866531584  423889/868126304
      data      0c.22   0c    1   6   FC:B   -  ATA   7200 423111/866531584  423889/868126304
      data      0c.20   0c    1   4   FC:B   -  ATA   7200 423111/866531584  423889/868126304
      data      0c.19   0c    1   3   FC:B   -  ATA   7200 423111/866531584  423889/868126304
      data      0a.29   0a    1   13  FC:A   -  ATA   7200 423111/866531584  423889/868126304

    RAID group /aggr0/plex0/rg1 (normal)

      RAID Disk Device  HA  SHELF BAY CHAN Pool Type  RPM  Used (MB/blks)    Phys (MB/blks)
      --------- ------  ------------- ---- ---- ---- ----- --------------    --------------
      dparity   0a.32   0a    2   0   FC:A   -  ATA   7200 423111/866531584  423889/868126304
      parity    0c.33   0c    2   1   FC:B   -  ATA   7200 423111/866531584  423889/868126304
      data      0c.34   0c    2   2   FC:B   -  ATA   7200 423111/866531584  423889/868126304
      data      0a.35   0a    2   3   FC:A   -  ATA   7200 423111/866531584  423889/868126304
      data      0a.36   0a    2   4   FC:A   -  ATA   7200 423111/866531584  423889/868126304
      data      0c.37   0c    2   5   FC:B   -  ATA   7200 423111/866531584  423889/868126304
      data      0c.38   0c    2   6   FC:B   -  ATA   7200 423111/866531584  423889/868126304
      data      0a.39   0a    2   7   FC:A   -  ATA   7200 423111/866531584  423889/868126304
      data      0a.40   0a    2   8   FC:A   -  ATA   7200 423111/866531584  423889/868126304
      data      0c.41   0c    2   9   FC:B   -  ATA   7200 423111/866531584  423889/868126304
      data      0c.42   0c    2   10  FC:B   -  ATA   7200 423111/866531584  423889/868126304
      data      0c.43   0c    2   11  FC:B   -  ATA   7200 423111/866531584  423889/868126304
      data      0c.44   0c    2   12  FC:B   -  ATA   7200 423111/866531584  423889/868126304
      data      0c.58   0c    3   10  FC:B   -  ATA   7200 423111/866531584  423889/868126304

    RAID group /aggr0/plex0/rg2 (degraded)

      RAID Disk Device  HA  SHELF BAY CHAN Pool Type  RPM  Used (MB/blks)    Phys (MB/blks)
      --------- ------  ------------- ---- ---- ---- ----- --------------    --------------
      dparity   0c.57   0c    3   9   FC:B   -  ATA   7200 423111/866531584  423889/868126304
      parity    0c.49   0c    3   1   FC:B   -  ATA   7200 423111/866531584  423889/868126304
      data      0c.27   0c    1   11  FC:B   -  ATA   7200 423111/866531584  423889/868126304
      data      0c.48   0c    3   0   FC:B   -  ATA   7200 423111/866531584  423889/868126304
      data      0c.60   0c    3   12  FC:B   -  ATA   7200 423111/866531584  423889/868126304
      data      0c.45   0c    2   13  FC:B   -  ATA   7200 423111/866531584  423889/868126304
      data      0c.51   0c    3   3   FC:B   -  ATA   7200 423111/866531584  423889/868126304
      data      0c.50   0c    3   2   FC:B   -  ATA   7200 423111/866531584  423889/868126304
      data      0c.56   0c    3   8   FC:B   -  ATA   7200 423111/866531584  423889/868126304
      data      0a.54   0a    3   6   FC:A   -  ATA   7200 423111/866531584  423889/868126304
      data      0c.52   0c    3   4   FC:B   -  ATA   7200 423111/866531584  423889/868126304
      data      FAILED          N/A                   423111/866531584

Aggregate aggr1 (online, raid_dp) (block checksums)
  Plex /aggr1/plex0 (online, normal, active)
    RAID group /aggr1/plex0/rg0 (normal)

      RAID Disk Device  HA  SHELF BAY CHAN Pool Type  RPM  Used (MB/blks)    Phys (MB/blks)
      --------- ------  ------------- ---- ---- ---- ----- --------------    --------------
      dparity   0c.64   0c    4   0   FC:B   -  ATA   7200 847555/1735794176 847827/1736350304
      parity    0a.70   0a    4   6   FC:A   -  ATA   7200 847555/1735794176 847827/1736350304
      data      0c.75   0c    4   11  FC:B   -  ATA   7200 847555/1735794176 847827/1736350304
      data      0a.68   0a    4   4   FC:A   -  ATA   7200 847555/1735794176 847827/1736350304
      data      0c.67   0c    4   3   FC:B   -  ATA   7200 847555/1735794176 847827/1736350304
      data      0a.72   0a    4   8   FC:A   -  ATA   7200 847555/1735794176 847827/1736350304
      data      0c.65   0c    4   1   FC:B   -  ATA   7200 847555/1735794176 847827/1736350304
      data      0c.76   0c    4   12  FC:B   -  ATA   7200 847555/1735794176 847827/1736350304
      data      0a.69   0a    4   5   FC:A   -  ATA   7200 847555/1735794176 847827/1736350304
      data      0a.74   0a    4   10  FC:A   -  ATA   7200 847555/1735794176 847827/1736350304
      data      0c.73   0c    4   9   FC:B   -  ATA   7200 847555/1735794176 847827/1736350304
      data      0a.66   0a    4   2   FC:A   -  ATA   7200 847555/1735794176 847827/1736350304
      data      0c.71   0c    4   7   FC:B   -  ATA   7200 847555/1735794176 847827/1736350304
      data      0a.61   0a    3   13  FC:A   -  ATA   7200 847555/1735794176 847827/1736350304


Spare disks

RAID Disk       Device  HA  SHELF BAY CHAN Pool Type  RPM  Used (MB/blks)    Phys (MB/blks)
---------       ------  ------------- ---- ---- ---- ----- --------------    --------------
Spare disks for block or zoned checksum traditional volumes or aggregates
spare           0a.59   0a    3   11  FC:A   -  ATA   7200 847555/1735794176 847827/1736350304
spare           0a.77   0a    4   13  FC:A   -  ATA   7200 847555/1735794176 847827/1736350304
spare           0c.53   0c    3   5   FC:B   -  ATA   7200 847555/1735794176 847827/1736350304
spare           0c.55   0c    3   7   FC:B   -  ATA   7200 847555/1735794176 847827/1736350304

1 ACCEPTED SOLUTION

aborzenkov

I believe I found it. Replacing 500GB disk with 1TB disk will cause total physical capacity of aggregate to exceed 16TB and this is not allowed in Data ONTAP 7.2 You actually must have seen "The reconstruction cannot start in RAID group [raid group]: Operation would make volume too big" in logs ...

 

So yes, replacing one of 1TB spare disks with 500GB disk would help in this case. Or you could upgrade to 7.3 which does not count parity disks against total physical capacity ...

View solution in original post

30 REPLIES 30

msantander

I'm also looking for 500 GB disks on ebay. But seems that depending on size disk, reference are different. Is this correct?

 

NetApp X 267 A-R5 / 500 GB

 

NetApp X 269 A-R5 / 1 Tb

 

If this is correct, I'll buy some x267 disks and I'll change the spare ones.

 

Thanks.

aborzenkov

Before wastingspending money I'd first try reseating spare disks; may be it will trigger rebuild.

msantander

Hi,

 

How can I do that?. Can you please tell me the command line for reseating spare disks?

 

 

Thanks.

gavin_meadows

You need to physically remove and then insert the failed disk, but as you said there is no amber light on any of the disks we first need to get the disk id of the failed disk which is what most of the latest post have been based around.

 

If you know the disk id you can make the light blink amber and then reseat it:

 

fas01> priv set advanced
Warning: These advanced commands are potentially dangerous; use
them only when directed to do so by NetApp
personnel.
fas01*> blink_on <disk_name>

 

A long winded way to find the disk id would be the process of elimination.  ie list out all of the disk id's that you can see and then identify the missing one....

aborzenkov

 list out all of the disk id's that you can see and then identify the missing one....

There are 56 disks in 4 shelves. Nothing is missing ...

msantander

So...how can i find the failed ones?

 

I'm really worried with this. Seems there's no way of finding failed disks.

 

Thks.

aborzenkov

So...how can i find the failed ones?

You can find it by comparing ASUP before failure or reading logs. But it is the wrong question - what really matters is not which of spare drives was part of aggregate, but why aggregate reconstruction does not start.

gavin_meadows

you are missing the disk id NOT a disk:

 

RAID group /aggr0/plex0/rg2 (degraded)

      RAID Disk Device  HA  SHELF BAY CHAN Pool Type  RPM  Used (MB/blks)    Phys (MB/blks)
      --------- ------  ------------- ---- ---- ---- ----- --------------    --------------
      dparity   0c.57   0c    3   9   FC:B   -  ATA   7200 423111/866531584  423889/868126304
      parity    0c.49   0c    3   1   FC:B   -  ATA   7200 423111/866531584  423889/868126304
      data      0c.27   0c    1   11  FC:B   -  ATA   7200 423111/866531584  423889/868126304
      data      0c.48   0c    3   0   FC:B   -  ATA   7200 423111/866531584  423889/868126304
      data      0c.60   0c    3   12  FC:B   -  ATA   7200 423111/866531584  423889/868126304
      data      0c.45   0c    2   13  FC:B   -  ATA   7200 423111/866531584  423889/868126304
      data      0c.51   0c    3   3   FC:B   -  ATA   7200 423111/866531584  423889/868126304
      data      0c.50   0c    3   2   FC:B   -  ATA   7200 423111/866531584  423889/868126304
      data      0c.56   0c    3   8   FC:B   -  ATA   7200 423111/866531584  423889/868126304
      data      0a.54   0a    3   6   FC:A   -  ATA   7200 423111/866531584  423889/868126304
      data      0c.52   0c    3   4   FC:B   -  ATA   7200 423111/866531584  423889/868126304
      data      FAILED          N/A                   423111/866531584

 

 

By listing all the id's you should spot the missing one.  As an example  the sequence might go 0c.50 0c.51 0c.52 0c.54 0c.55 0c.56  - the missing disk id = 0c.53

 

You would need to do this for all your disk id's on the system and familiarise yourself with the disk id ranges for each shelf in a loop

aborzenkov

By listing all the id's you should spot the missing one.


You may be surprised, but I have actually done it before replying.

aborzenkov

I mean physically reseat drive - pull out, wait a minute, plug in.

jeras
The issue is that you have two different SATA diisk sizes in this aggregate, but you only have spares for the larger of the two drive sizes. ONTAP is trying to replace the failed disk with a disk of the same size in the RAID group and there isn't one.

You'll need to use the disk replace command to replace your failed disk with one of the spares. You may get a warning about the replacement disk being downsized that you'll need to reply yes to.

Ken

msantander

Thanks for your answers. Let's see if I understand what I must do:

 

Firsrt find the broken disk. Not easy, because all lights on netapp are green.....

 

When I localize them, the commands are like this?

 

disk assign <0a.50> -o <nnetapp.bdn.....> -f

 

But when I try to use the comand "disk assign" console says that  disk: Did not recognize option "assign".

My netapp version is 7.2.6.1

 

Thanks.

aborzenkov

Disk size is OK in this case - NetApp selects disk of same size or larger as replacement. Given that disk types and RPM seem to match, the only explanation would be different pool. Please, paste output of "disk show -v". Please use CODE tags so it is readable.

jeras

I beg to differ.  The size of the disk is NOT ok in this case. The RAID group with the failed disk  has smaller disks than the size of the spares.  Data ONTAP will not automatically grab a larger spare drive to replace a failed smaller disk because it would result in the larger spare disk being downsized in this case. You have to manually force the swap.  If the dual parity disk was at the same size as the larger spare, then the larger spare disks would be grabbed automatically.  That's not the case here. The error message that ONTAP is displaying in this case is because it is looking for the same size disk as a spare and there are none and it won't use the larger spares automatically because it will result in the disk being downsized.

 

Ken

aborzenkov

I believe I found it. Replacing 500GB disk with 1TB disk will cause total physical capacity of aggregate to exceed 16TB and this is not allowed in Data ONTAP 7.2 You actually must have seen "The reconstruction cannot start in RAID group [raid group]: Operation would make volume too big" in logs ...

 

So yes, replacing one of 1TB spare disks with 500GB disk would help in this case. Or you could upgrade to 7.3 which does not count parity disks against total physical capacity ...

View solution in original post

msantander

You're right!!!

 

I've replaced one of 1TB spare disks with 500GB disk and it works. Now netapp is rebuilding..

 

Thanks  Smiley Very Happy

 

Martí.

aborzenkov

Data ONTAP will not automatically grab a larger spare drive to replace a failed smaller disk because it would result in the larger spare disk being downsized in this case.

Yes. And where is the problem? https://kb.netapp.com/support/index?page=content&id=3013616&locale=en_US

msantander

Hi again,

 

Sorry, I don't know what are code tags. What do you mean. I'll help in anything.

 

Seems that "dsik show -v" doesn't work. I've tried to use "sysconfig -v", and i'll get this.

 

Options are:
        fail [-i] [-f] <disk_name>  - fail a file system disk
        remove [-w] <disk_name>     - remove a spare disk
        swap                        - prepare (quiet) bus for swap
        unswap                      - undo disk swap and resume service
        scrub  { start | stop }     - start or stop disk scrubbing
        replace {start [-f] [-m] <disk_name> <spare_disk_name>} | {stop <disk_name>} - replace a file system disk with a spare disk or stop replacing
        zero spares                 - Zero all spare disks
        checksum {<disk_name> | all} [-c block | zoned]
        sanitize { start | abort | status | release } - sanitize one or more disks
        maint { start | abort | status | list} - run maintenance tests on one or more disks
NETAPP> sysconfig -v
        NetApp Release 7.2.6.1P2: Wed Jan 21 04:38:40 PST 2009
        System ID: 0101199841 (NETAPP)
        System Serial Number: 2077001 (NETAPP)
        System Rev: B1
        slot 0: System Board 2797 MHz (NetApp System Board X a2)
                Model Name:         FAS3020
                Part Number:        110-00081
                Revision:           a2
                Serial Number:      0406456
                Firmware release:   CFE 3.1.0
                Agent FW version    15
                LCD FW version      1.7
                Processors:         2
                Memory Size:        2048 MB
        slot 0: Dual 10/100/1000 Ethernet Controller VI
                e0a MAC Address:    00:a0:98:08:fd:2a (auto-1000t-fd-up)
                e0b MAC Address:    00:a0:98:08:fd:2b (auto-unknown-down)
                e0c MAC Address:    00:a0:98:08:fd:28 (auto-unknown-down)
                e0d MAC Address:    00:a0:98:08:fd:29 (auto-unknown-down)
                Device Type:        Rev 3
        slot 0: FC Host Adapter 0a (Dual-channel, QLogic 2322 rev. 3, 64-bit, L-port, <UP>)
                Firmware rev:   3.3.27
                Host Loop Id:   7       FC Node Name:   5:00a:098200:01be8e
                Cacheline size: 16      FC Packet size: 2048
                SRAM parity:    Yes     External GBIC:  No
                Link Data Rate: 2 Gbit
                 ID     Vendor   Model            FW    Size
                 16: NETAPP   X267_SGLXY500SSX AQJZ 423.1GB (976642092 512B/sect)
                 17: NETAPP   X267_SGLXY500SSX AQJZ 423.1GB (976642092 512B/sect)
                 18: NETAPP   X267_SGLXY500SSX AQJZ 423.1GB (976642092 512B/sect)
                 19: NETAPP   X267_SGLXY500SSX AQJZ 423.1GB (976642092 512B/sect)
                 20: NETAPP   X267_SGLXY500SSX AQJZ 423.1GB (976642092 512B/sect)
                 21: NETAPP   X267_SGLXY500SSX AQJZ 423.1GB (976642092 512B/sect)
                 22: NETAPP   X267_SGLXY500SSX AQJZ 423.1GB (976642092 512B/sect)
                 23: NETAPP   X267_SGLXY500SSX AQJZ 423.1GB (976642092 512B/sect)
                 24: NETAPP   X267_SGLXY500SSX AQJZ 423.1GB (976642092 512B/sect)
                 25: NETAPP   X267_SGLXY500SSX AQJZ 423.1GB (976642092 512B/sect)
                 26: NETAPP   X267_SGLXY500SSX AQJZ 423.1GB (976642092 512B/sect)
                 27: NETAPP   X267_SGLXY500SSX AQJZ 423.1GB (976642092 512B/sect)
                 28: NETAPP   X267_SGLXY500SSX AQJZ 423.1GB (976642092 512B/sect)
                 29: NETAPP   X267_SGLXY500SSX AQJZ 423.1GB (976642092 512B/sect)
                 32: NETAPP   X267_HGEMIT50SSX A90A 423.1GB (976642092 512B/sect)
                 33: NETAPP   X267_HGEMIT50SSX A90A 423.1GB (976642092 512B/sect)
                 34: NETAPP   X267_HGEMIT50SSX A90A 423.1GB (976642092 512B/sect)
                 35: NETAPP   X267_HGEMIT50SSX A90A 423.1GB (976642092 512B/sect)
                 36: NETAPP   X267_HGEMIT50SSX A90A 423.1GB (976642092 512B/sect)
                 37: NETAPP   X267_HGEMIT50SSX A90A 423.1GB (976642092 512B/sect)
                 38: NETAPP   X267_HGEMIT50SSX A90A 423.1GB (976642092 512B/sect)
                 39: NETAPP   X267_HGEMIT50SSX A90A 423.1GB (976642092 512B/sect)
                 40: NETAPP   X267_HGEMIT50SSX A90A 423.1GB (976642092 512B/sect)
                 41: NETAPP   X267_HGEMIT50SSX A90A 423.1GB (976642092 512B/sect)
                 42: NETAPP   X267_HGEMIT50SSX A90A 423.1GB (976642092 512B/sect)
                 43: NETAPP   X267_HGEMIT50SSX A90A 423.1GB (976642092 512B/sect)
                 44: NETAPP   X267_HGEMIT50SSX A90A 423.1GB (976642092 512B/sect)
                 45: NETAPP   X267_HGEMIT50SSX A90A 423.1GB (976642092 512B/sect)
                 48: NETAPP   X267_SMOOST50SSX NA01 423.1GB (976642092 512B/sect)
                 49: NETAPP   X267_SMOOST50SSX NA01 423.1GB (976642092 512B/sect)
                 50: NETAPP   X267_SMOOST50SSX NA01 423.1GB (976642092 512B/sect)
                 51: NETAPP   X267_SMOOST50SSX NA01 423.1GB (976642092 512B/sect)
                 52: NETAPP   X267_SMOOST50SSX NA01 423.1GB (976642092 512B/sect)
                 53: HITACHI  HDE721010SLA33SX A3BC 847.5GB (1953394092 512B/sect)
                 54: NETAPP   X267_SMOOST50SSX NA01 423.1GB (976642092 512B/sect)
                 55: HITACHI  HDE721010SLA33SX A3BC 847.5GB (1953394092 512B/sect)
                 56: NETAPP   X267_SMOOST50SSX NA01 423.1GB (976642092 512B/sect)
                 57: NETAPP   X267_SMOOST50SSX NA01 423.1GB (976642092 512B/sect)
                 58: NETAPP   X267_SMOOST50SSX NA01 423.1GB (976642092 512B/sect)
                 59: WDC      WD1002FBYS-05ASX NA01 847.5GB (1953394092 512B/sect)
                 60: NETAPP   X267_SMOOST50SSX NA01 423.1GB (976642092 512B/sect)
                 61: HITACHI  HUA722010ALA33SX NA01 847.5GB (1953394092 512B/sect)
                 64: WDC      WD1002FBYS-05ASX NA01 847.5GB (1953394092 512B/sect)
                 65: WDC      WD1002FBYS-05ASX NA01 847.5GB (1953394092 512B/sect)
                 66: WDC      WD1002FBYS-05ASX NA01 847.5GB (1953394092 512B/sect)
                 67: WDC      WD1002FBYS-05ASX NA01 847.5GB (1953394092 512B/sect)
                 68: WDC      WD1002FBYS-05ASX NA01 847.5GB (1953394092 512B/sect)
                 69: WDC      WD1002FBYS-05ASX NA01 847.5GB (1953394092 512B/sect)
                 70: WDC      WD1002FBYS-05ASX NA01 847.5GB (1953394092 512B/sect)
                 71: WDC      WD1002FBYS-05ASX NA01 847.5GB (1953394092 512B/sect)
                 72: WDC      WD1002FBYS-05ASX NA01 847.5GB (1953394092 512B/sect)
                 73: WDC      WD1002FBYS-05ASX NA01 847.5GB (1953394092 512B/sect)
                 74: WDC      WD1002FBYS-05ASX NA01 847.5GB (1953394092 512B/sect)
                 75: WDC      WD1002FBYS-05ASX NA01 847.5GB (1953394092 512B/sect)
                 76: WDC      WD1002FBYS-05ASX NA01 847.5GB (1953394092 512B/sect)
                 77: WDC      WD1002FBYS-05ASX NA01 847.5GB (1953394092 512B/sect)
                Shelf 1: AT-FCX  Firmware rev. AT-FCX A: 37  AT-FCX B: 37
                Shelf 2: AT-FCX  Firmware rev. AT-FCX A: 37  AT-FCX B: 37
                Shelf 3: AT-FCX  Firmware rev. AT-FCX A: 38  AT-FCX B: 38
                Shelf 4: AT-FCX  Firmware rev. AT-FCX A: 38  AT-FCX B: 38
        slot 0: FC Host Adapter 0b (Dual-channel, QLogic 2322 rev. 3, 64-bit, L-port, <OFFLINE (hard)>)
                Firmware rev:   3.3.27
                Host Loop Id:   0       FC Node Name:   5:00a:098300:01be8e
                Cacheline size: 16      FC Packet size: 2048
                SRAM parity:    Yes     External GBIC:  No
                Link Data Rate: 1 Gbit
        slot 0: FC Host Adapter 0c (Dual-channel, QLogic 2322 rev. 3, 64-bit, L-port, <UP>)
                Firmware rev:   3.3.27
                Host Loop Id:   7       FC Node Name:   5:00a:098000:01be8e
                Cacheline size: 16      FC Packet size: 2048
                SRAM parity:    Yes     External GBIC:  No
                Link Data Rate: 2 Gbit
                 ID     Vendor   Model            FW    Size
                 16: NETAPP   X267_SGLXY500SSX AQJZ 423.1GB (976642092 512B/sect)
                 17: NETAPP   X267_SGLXY500SSX AQJZ 423.1GB (976642092 512B/sect)
                 18: NETAPP   X267_SGLXY500SSX AQJZ 423.1GB (976642092 512B/sect)
                 19: NETAPP   X267_SGLXY500SSX AQJZ 423.1GB (976642092 512B/sect)
                 20: NETAPP   X267_SGLXY500SSX AQJZ 423.1GB (976642092 512B/sect)
                 21: NETAPP   X267_SGLXY500SSX AQJZ 423.1GB (976642092 512B/sect)
                 22: NETAPP   X267_SGLXY500SSX AQJZ 423.1GB (976642092 512B/sect)
                 23: NETAPP   X267_SGLXY500SSX AQJZ 423.1GB (976642092 512B/sect)
                 24: NETAPP   X267_SGLXY500SSX AQJZ 423.1GB (976642092 512B/sect)
                 25: NETAPP   X267_SGLXY500SSX AQJZ 423.1GB (976642092 512B/sect)
                 26: NETAPP   X267_SGLXY500SSX AQJZ 423.1GB (976642092 512B/sect)
                 27: NETAPP   X267_SGLXY500SSX AQJZ 423.1GB (976642092 512B/sect)
                 28: NETAPP   X267_SGLXY500SSX AQJZ 423.1GB (976642092 512B/sect)
                 29: NETAPP   X267_SGLXY500SSX AQJZ 423.1GB (976642092 512B/sect)
                 32: NETAPP   X267_HGEMIT50SSX A90A 423.1GB (976642092 512B/sect)
                 33: NETAPP   X267_HGEMIT50SSX A90A 423.1GB (976642092 512B/sect)
                 34: NETAPP   X267_HGEMIT50SSX A90A 423.1GB (976642092 512B/sect)
                 35: NETAPP   X267_HGEMIT50SSX A90A 423.1GB (976642092 512B/sect)
                 36: NETAPP   X267_HGEMIT50SSX A90A 423.1GB (976642092 512B/sect)
                 37: NETAPP   X267_HGEMIT50SSX A90A 423.1GB (976642092 512B/sect)
                 38: NETAPP   X267_HGEMIT50SSX A90A 423.1GB (976642092 512B/sect)
                 39: NETAPP   X267_HGEMIT50SSX A90A 423.1GB (976642092 512B/sect)
                 40: NETAPP   X267_HGEMIT50SSX A90A 423.1GB (976642092 512B/sect)
                 41: NETAPP   X267_HGEMIT50SSX A90A 423.1GB (976642092 512B/sect)
                 42: NETAPP   X267_HGEMIT50SSX A90A 423.1GB (976642092 512B/sect)
                 43: NETAPP   X267_HGEMIT50SSX A90A 423.1GB (976642092 512B/sect)
                 44: NETAPP   X267_HGEMIT50SSX A90A 423.1GB (976642092 512B/sect)
                 45: NETAPP   X267_HGEMIT50SSX A90A 423.1GB (976642092 512B/sect)
                 48: NETAPP   X267_SMOOST50SSX NA01 423.1GB (976642092 512B/sect)
                 49: NETAPP   X267_SMOOST50SSX NA01 423.1GB (976642092 512B/sect)
                 50: NETAPP   X267_SMOOST50SSX NA01 423.1GB (976642092 512B/sect)
                 51: NETAPP   X267_SMOOST50SSX NA01 423.1GB (976642092 512B/sect)
                 52: NETAPP   X267_SMOOST50SSX NA01 423.1GB (976642092 512B/sect)
                 53: HITACHI  HDE721010SLA33SX A3BC 847.5GB (1953394092 512B/sect)
                 54: NETAPP   X267_SMOOST50SSX NA01 423.1GB (976642092 512B/sect)
                 55: HITACHI  HDE721010SLA33SX A3BC 847.5GB (1953394092 512B/sect)
                 56: NETAPP   X267_SMOOST50SSX NA01 423.1GB (976642092 512B/sect)
                 57: NETAPP   X267_SMOOST50SSX NA01 423.1GB (976642092 512B/sect)
                 58: NETAPP   X267_SMOOST50SSX NA01 423.1GB (976642092 512B/sect)
                 59: WDC      WD1002FBYS-05ASX NA01 847.5GB (1953394092 512B/sect)
                 60: NETAPP   X267_SMOOST50SSX NA01 423.1GB (976642092 512B/sect)
                 61: HITACHI  HUA722010ALA33SX NA01 847.5GB (1953394092 512B/sect)
                 64: WDC      WD1002FBYS-05ASX NA01 847.5GB (1953394092 512B/sect)
                 65: WDC      WD1002FBYS-05ASX NA01 847.5GB (1953394092 512B/sect)
                 66: WDC      WD1002FBYS-05ASX NA01 847.5GB (1953394092 512B/sect)
                 67: WDC      WD1002FBYS-05ASX NA01 847.5GB (1953394092 512B/sect)
                 68: WDC      WD1002FBYS-05ASX NA01 847.5GB (1953394092 512B/sect)
                 69: WDC      WD1002FBYS-05ASX NA01 847.5GB (1953394092 512B/sect)
                 70: WDC      WD1002FBYS-05ASX NA01 847.5GB (1953394092 512B/sect)
                 71: WDC      WD1002FBYS-05ASX NA01 847.5GB (1953394092 512B/sect)
                 72: WDC      WD1002FBYS-05ASX NA01 847.5GB (1953394092 512B/sect)
                 73: WDC      WD1002FBYS-05ASX NA01 847.5GB (1953394092 512B/sect)
                 74: WDC      WD1002FBYS-05ASX NA01 847.5GB (1953394092 512B/sect)
                 75: WDC      WD1002FBYS-05ASX NA01 847.5GB (1953394092 512B/sect)
                 76: WDC      WD1002FBYS-05ASX NA01 847.5GB (1953394092 512B/sect)
                 77: WDC      WD1002FBYS-05ASX NA01 847.5GB (1953394092 512B/sect)
                Shelf 1: AT-FCX  Firmware rev. AT-FCX A: 37  AT-FCX B: 37
                Shelf 2: AT-FCX  Firmware rev. AT-FCX A: 37  AT-FCX B: 37
                Shelf 3: AT-FCX  Firmware rev. AT-FCX A: 38  AT-FCX B: 38
                Shelf 4: AT-FCX  Firmware rev. AT-FCX A: 38  AT-FCX B: 38
        slot 0: FC Host Adapter 0d (Dual-channel, QLogic 2322 rev. 3, 64-bit, L-port, <OFFLINE (hard)>)
                Firmware rev:   3.3.27
                Host Loop Id:   0       FC Node Name:   5:00a:098100:01be8e
                Cacheline size: 16      FC Packet size: 2048
                SRAM parity:    Yes     External GBIC:  No
                Link Data Rate: 1 Gbit
        slot 0: SCSI Host Adapter 0e (Adaptec AIC7892, <ONLINE>)
                HW Version 0.0
                Ultra160 SCSI, Low Voltage Differential
        slot 0: NetApp ATA/IDE Adapter 0f (0x000001f0)
                0f.0                 NACF1GBJ U-A11            5-04 977MB 512B/sect (STI1J7e607054181221)
        slot 1: NVRAM (NetApp NVRAM V)
                Revision:           B1
                Serial Number:      536545
                Memory Size:        512 MB
                Battery Status:     OK (4068 mV)
                Charger Status:     OFF
                Running Firmware:   5 (2.0.0)
                Cluster Interconnect Port 1:  disconnected
                Cluster Interconnect Port 2:  disconnected

aborzenkov

Commands do not work because you have hardware based disk ownership, so disk assignment is moot. This is single node system so pool should not really matter either. Did you try manually starting "disk replace" for failed disk?

 

Unfortunately to say anything one would need to fetch logs and analyze them. I suggest you open case with NetApp to investigate.

msantander

Hi,

 

Netapp only helps with my Fas2240 (I've two netapp series) ,but  with FAS3020 they said is too old for opening a case. I'll try this, but I need some help:

 

replace {start [-f] [-m] <disk_name> <spare_disk_name>}

 

Spare disk name is easy, but:

 

How can I know wich one is the falied disk? I'm not able to find this one i my system.

 

Thanks again.

 

Announcements
NetApp on Discord Image

We're on Discord, are you?

Live Chat, Watch Parties, and More!

Explore Banner

Meet Explore, NetApp’s digital sales platform

Engage digitally throughout the sales process, from product discovery to configuration, and handle all your post-purchase needs.

NetApp Insights to Action
I2A Banner
Public