Hello good day. I want to mount an NFS volume from my NetApp storage to a Hikvision NVR. Each time I specify the file path, it discovers the NFS Mount, via the IP addresses configured on the storage. But it is greyed out on the NVR Server itself. Is there a compatibility issue here, or a permissions issue? Please help out to resolve this.
... View more
Hello, I Need some help, as I'm doing copy operation using XCP between two NAS shares [SVMs] which are located in Europe and NorthAmerica respectively. But getting timeout issues, as the copy operation is starting after 7 mins of delay. whereas Europe t Europe SVMs it is fast. Please help me with the above request. Attaching some logs. XCP 1.9.3; (c) 2024 NetApp, Inc.; Licensed to Vlad Artene-Sion [None] until Fri Feb 14 08:20:30 2025 Job ID: Job_test_trans_2024-06-11_18.00.23.898595_copy 4.23 KiB in (864/s), 3.53 KiB out (721/s), 5s 4.23 KiB in (0/s), 3.53 KiB out (0/s), 10s 4.23 KiB in (0/s), 3.53 KiB out (0/s), 15s 4.23 KiB in (0/s), 3.53 KiB out (0/s), 20s 4.23 KiB in (0/s), 3.53 KiB out (0/s), 25s 4.23 KiB in (0/s), 3.53 KiB out (0/s), 30s Same as above it transfer 0 bytes for 7 mins and then actual copy starts.
... View more
I have a Storage Grid configured with redundant SG100s and (12) SG5712s for cold storage. I've been trying to find a way to collect all the drive information within the various nodes. This system is air-gapped and not connected to an active IQ. Each disk shelf has 10 drives, and rather not shut down each node individually to pull the drives and get the required P/N and S/N. The Grid Topology doesn't show this information and there are not methods I've found to display it via CLI. The A250 that is on the front end of the storage shows this info in the OnTap GUI, but the Storage Grid is a different beast. Any thoughts, or inputs would be greatly appreciated.
... View more
I have a Windows 2012 storage server with in-built drives. Have purchased FAS 2720A and planning to transfer all data. Can someone confirm what options I have to ensure smooth migration along with file permissions? I checked XCP but not getting details like how it will handle permissions while moving data. As well I can see a few 3rd party tools which are appearing very easy compared to the setup of Netapp XCP.
... View more
It appears that NetApp is no longer actively updating NetApp.io (https://netapp.io/) as it has almost been 12 months since the last blog post. Is there a new resource that we should be using for Automation and DevOps?
... View more