Microsoft Virtualization Discussions

Failure: Invoke-NaHostVolumeSpaceReclaim :

I had the customer run the power shell script for space reclaim on the LUNs.  When he attempted to run, he go the following failure message.

 

S & H are 2 LUNS which failed with message,  E is another LUN and that worked.

 

I had him run the Get-NaHostDisk command and it returned the following.  The three highlighted disks are the ones he is unable to reclaim space on.  Not sure what my next step should be.

 

4 REPLIES 4

Re: Failure: Invoke-NaHostVolumeSpaceReclaim :

Could you also try using Nc instead of Na ( ("Na" = 7-mode, "Nc" = clustered), as this is an cDOT Luns.

 

Even though 'Na' also works but you can give it a try:

InvokeNcHostVolumeSpaceReclaim

Re: Failure: Invoke-NaHostVolumeSpaceReclaim :

I would check two other things as well.

 

1. Is this LUN a cluster resource? If so, you may need to run the command from the Windows node that owns the resource.

2. Ensure that "space-allocation" is enabled on the LUN in ONTAP. If it isn't, then you can't reclaim space from it.

 

Let us know if that helps.

Highlighted

Re: Failure: Invoke-NaHostVolumeSpaceReclaim :

 

 

Forums