I define 2 variable
$node0disk = get-ncdisk -zapi | Where-Object {($_.Bay -ne 23) -and ($_.DiskRaidInfo.ContainerType -eq "spare") -and ($_.DiskOwnershipInfo.OwnerNodeId -eq $allnode[0].NodeSystemId)}
$allnode = get-ncnode
the $node0disk output is
Name Shelf Bay Position Capacity RPM FW Model Paths Aggregate
---- ----- --- -------- -------- --- -- ----- ----- ---------
NET-1.38 16 present 4 GB 15k 0042 VD-4000MB-FZ-520 2
NET-1.39 17 present 4 GB 15k 0042 VD-4000MB-FZ-520 2
NET-1.40 18 present 4 GB 15k 0042 VD-4000MB-FZ-520 2
NET-1.41 19 present 4 GB 15k 0042 VD-4000MB-FZ-520 2
NET-1.42 20 present 4 GB 15k 0042 VD-4000MB-FZ-520 2
NET-1.43 21 present 4 GB 15k 0042 VD-4000MB-FZ-520 2
NET-1.44 22 present 4 GB 15k 0042 VD-4000MB-FZ-520 2
NET-1.1 24 present 4 GB 15k 0042 VD-4000MB-FZ-520 2
NET-1.2 25 present 4 GB 15k 0042 VD-4000MB-FZ-520 2
NET-1.3 26 present 4 GB 15k 0042 VD-4000MB-FZ-520 2
NET-1.4 27 present 4 GB 15k 0042 VD-4000MB-FZ-520 2
NET-1.5 28 present 4 GB 15k 0042 VD-4000MB-FZ-520 2
NET-1.6 29 present 4 GB 15k 0042 VD-4000MB-FZ-520 2
NET-1.35 32 present 4 GB 15k 0042 VD-4000MB-FZ-520 2
and I use the command
new-ncaggr aggr1 -disks $node0disk -Node $allnode[0]
it fail,the message is
new-ncaggr : [400]: "block_storage.primary.disk_count" is a required field
Please tell me how to fix my command
Thanks
