Microsoft Virtualization Discussions

Highlighted

SMVI Licensing

If I have three ESX hosts and a FAS2040 (dual) at a primary site and two ESX hosts and a FAS2040 (single) at a DR site what SMVI licensing do I require?

I will also be using snapmirror integrated with SMVI for replicating VMs from primary to DR and I wont be running any VMs that require protection at the DR site....

22 REPLIES 22
Highlighted

Re: SMVI Licensing

Take a look at the 6th reply of this thread http://communities.netapp.com/message/20084

Side-note: If you have a flexclone licensed, I would HIGHLY recommend using NetApp Virtual Storage Console (VSC), unifying NetApp's Rapid Clone Utility with SMVI into a vCenter plug-in...makes life easy-peasy!

http://blogs.netapp.com/virtualstorageguy/2010/07/netapp-vsc-20-vcenter-plug-in-announced.html

Highlighted

Re: SMVI Licensing

for some reason I cant access that thread - Access denied!

can you copy and paste for me?

Highlighted

Re: SMVI Licensing

Try it now...

Highlighted

Re: SMVI Licensing

The only place where license is mentioned in this thread is when it talks about SnapVault. It does not say anything about SMVI licensing … or I cannot find it ☺

Highlighted

Re: SMVI Licensing

Still can't see it!

Can anyone just explain what is needed for my situation on this thread please?

Highlighted

Re: SMVI Licensing

You can have a controller or host level license for SMVI. In addition based on what you want to do you may want

1) SnapMirror (if you are interested in DR)

2) FlexClone - This provides useful functionality like

    

     - Single file restore

     -restore VMDK to an alternate datastore

     -NFS datastore mounts (for backup verification)

     - cloning using RCU (which is a part of VSC 2.0 release)

REgards

Amrita

Highlighted

Re: SMVI Licensing

Can we license SMVI per-storage basis or only per-host basis?

When I type 'license' in FAS2040 storage CLI, I can see the following SnapManger options:

smdomino

smsql

snapmanager_hyperv
snapmanager_oracle
snapmanager_sap
snapmanager_sharepoint
snapmanagerexchange

but I cannot locate license option for VI.

Anybody know?

Highlighted

Re: SMVI Licensing

You can purchase SMVI licenses for your Filer(s) OR for your ESX hosts. Ask your NetApp contact, which alternative is cheaper. You have to purchase a Snapmirror license for each filer (controller). Also you have to add Flexclone licenses if you want to do Single File Restores. Do you want to use your single head filer as backup only?

Highlighted

Re: SMVI Licensing

OK, but where do you type storage-based license?

I don't see it in a list of licenses on my filer. Options for other SM licenses are there (smsql,...)

Is there any relevant document about SMVI licensing?

Highlighted

Re: SMVI Licensing

As of right now, there isn't a "SMVI license" that you add to the controller(s). NetApp is currently using the "honor system", expecting you to try-and-buy after a short trial period. They may in the future require and actual license. so for now, licensing the controllers with FlexClone is all that you should do.

Highlighted

Re: SMVI Licensing

Thank you people.

My customer wants to buy SMVI, but I did not understand that FlexClone is necessary for SMVI.

I understand that FlexClone is necessary only for Single File Restore operation, and only if datastore is NFS-mounted.

Cited from SMVI 2.0 Installation and Administration Guide tells that:

"In addition, to enable the single file restore feature for an NFS datastore and perform a mount operation,

you must purchase the FlexClone license and install it on the storage system"

If datastore is SAN-mounted (not NFS), SnapDrive and SnapRestore should be sufficient for Single File Restore?

Highlighted

Re: SMVI Licensing

I will have 2 controllers at the primary site and 1 controller at the DR site.

Do I need to license the controller for SMVI at the DR site if I am only doing single direction replication (to the DR site)? (I know I need snapmirror for all controllers)

If you purchase SMVI for the controllers (not ESX hosts) where do you apply the license if not on the controllers? Within the SMVI GUI?

Can I get away with FlexClone at the DR site only?

Highlighted

Re: SMVI Licensing

saganetapp,

You are correct, you won't need FlexClone.

FlexClone in SMVI serves 3 purposes:

1.) NFS datastore mounts

2.) NFS SFR (note: SMVI 2.0)

3.) VMDK backup/restores

Page 23 of the SMVI best practice guide http://media.netapp.com/documents/tr-3737.pdf

Re: SMVI Licensing

nsitps1976,

To reitterate...

There isn't an actual SMVI license that you apply to the controllers. Once you have evaluated SMVI, you just have to purchase the product. SMVI is a per controller purchase. What do you believe you will need SMVI at the DR site for?

Highlighted

Re: SMVI Licensing

OK, I read the document, but I'm still not sure.

There are 4 leves of restore granularity in SMVI 2.0:

     1) datastore,

     2) VM,

     3) VMDK, and

     4) single file.

When datastore type is VMFS, and FlexClone is not present, at which granularity restore is supported?

First two levels or all four levels?

Cloud Volumes ONTAP
Review Banner
All Community Forums
Public