DFM performance data missing

[breewsky5765]

A bunch of counters within the DFM performance reporting show 0.0 for their value.  Other counters show actual data.  Has anyone seen this before?   DFM 3.7.1

An example is below, i see this for most of the performance data

Volume SAN Performance Summary

imcnwnetapp1:sata3

Volume	Type	Aggregate	San Total Ops	SAN Latency (ms)
imcnjevs01_vault	Flexible	sata3	133.28	624.8
nw1_pr2_sata_01	Flexible	sata3	51.07	154.37
nw1_pr1_sata_03	Flexible	sata3	38.55	181.92
nw1_pr1_sata_02	Flexible	sata3	37.05	273.68
nw1_pr3_sata_01	Flexible	sata3	36.33	156.03
nw1_pr2_sata_05	Flexible	sata3	24.12	158.17
nw1_pr2_sata_06	Flexible	sata3	13.85	35.53
nw1_pr2_sata_04	Flexible	sata3	12.23	70.53
nw1_qa1_sata_01	Flexible	sata3	8.75	26.4
nw1_pr2_sata_07	Flexible	sata3	7.43	32.58
imcnjarisjadv01_app	Flexible	sata3	6.3	8.7
tivoli_restore	Flexible	sata3	0
sql_qa_c3_bkup2	Flexible	sata3	0	0
sql_qa_c3_bkup1	Flexible	sata3	0	0
sql_pr_c3_bkup2	Flexible	sata3	0	0
sql_pr_c2_bkup	Flexible	sata3	0	0
sap_install_bin	Flexible	sata3	0	0
imcnwmbx01_snapinfo	Flexible	sata3	0	0
imcnjsql3_bkup	Flexible	sata3	0	0
imcnjorcqa01_bkup	Flexible	sata3	0	0
imcnjorcpr03_bkup	Flexible	sata3	0	0
cifs_u	Flexible	sata3	0	0
cifs_sp	Flexible	sata3	0	0
cifs_mydocs	Flexible	sata3	0	0
cifs_mfgtch1	Flexible	sata3	0	0
cifs_md1	Flexible	sata3	0	0
cifs_j	Flexible	sata3	0	0

[reinoud7]

Are there luns in those volumes? Because it's the SAN report, maybe it only report latencies when luns are in that volume. I still running 3.6 and I don't know this report. But when I saw your volume names, those could indicate that those volumes don't have luns.

Just a small suggestion.

Reinoud

[breewsky5765]

All but 2 or 3 have LUNs in them.

I chose that report as an example, but any report shows similar results....

[harish]

san_ops for volumes is defined as the sum of san_read_ops, san_write_ops and san_other_ops. Can you verify if there are operations being performaned on your LUNs (using the stat CLI on the filer or using NMC) ?