Network and Storage Protocols

Unable to cd to NFS mount. Permission denied.

KRISH_ROCKS
20,282 Views

Hello,

I have exported root volume to couple of linux servers:

~~~~~~~~~~~

/vol/vol0       -sec=sys,rw=linux01:linux02:linux03

~~~~~~~~~~~

When I'm trying to mount from client, I'm getting "input/output read error".

~~~~~~~~~~~

  root@linux03:/# mount 10.123.10.22:/vol/vol0 /temp

mount.nfs: Input/output error

root@linux03:/#

~~~~~~~~~~~~

After googling I found I can mount the root volume using "nolock" option in mount.  However after mounting the share, I'm not able to CD to the NFS mount point. Says permission denied:

~~~~~~~~~~

root@linux03:/# mount -o nolock,rw 10.123.10.22:/vol/vol0 /temp

root@linux03:/# cd /temp

-bash: cd: /temp: Permission denied

~~~~~~~~~~~~

On client /temp have full permission:

~~~~~~~~~~~~

root@linux03:/# mount -o nolock,rw 10.123.10.22:/vol/vol0 /temp

root@linux03:/# ls -l /temp/

ls: /temp/: Permission denied

root@linux03:/# umount /temp

root@linux03:/# ls -ld /temp

drwxrwxrwx 2 root root 4096 May  2 12:36 /temp

root@linux03:/#

~~~~~~~~~~~~

root@linux03:/# mount

/dev/sda3 on / type ext3 (rw,noatime,data=writeback)

proc on /proc type proc (rw)

sysfs on /sys type sysfs (rw)

devpts on /dev/pts type devpts (rw,gid=5,mode=620)

/dev/sda2 on /tmp type ext3 (rw,nosuid,nodev,noatime,data=writeback)

/dev/sda1 on /boot type ext3 (rw,noatime,data=writeback)

tmpfs on /dev/shm type tmpfs (rw)

none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw)

sunrpc on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw)

10.123.10.22:/vol/vol0 on /temp type nfs (rw,nolock,addr=10.123.10.22)

~~~~~~~~~~~~

Any idea what I'm missing here?

Thanks,

Krish

4 REPLIES 4

billshaffer
20,282 Views

Assuming unix permissions, you need to grant root access - either just to linux01 (add root=linux01 as an option to export line) or to everyone (add anon=0), then exportfs -r.  If NTFS permissions, then root needs to map to a user that has access.

What versions of ONTAP and linux?  I've never had to use nolock to mount vol0...

Bill

KRISH_ROCKS
20,282 Views

Hi Bill,

Thanks for looking in to this.

Made following changes to the export entry :

/vol/vol0       -sec=sys,rw=linux01:linux02:linux03,root=linux01,nosuid

No luck.

Ontap version : 8.1.3 7-Mode

Linux:

Red Hat Enterprise Linux Server release 5.10 (Tikanga)

billshaffer
20,282 Views

You did an exportfs -r after modifying the export entry?  Also try exportfs -f to flush any possible cached negative responses.  And the security style for vol0 is unix?  I've (rarely) seen where you have to remount on the client after modifying the share, so you can try that.  Also check that nfs.require_valid_mapped_uid is off (or if on, that there is a valid mapping for root).  NFSv3 or v4?

Bill

KRISH_ROCKS
20,282 Views

Hi Bill,

Just remembered that I missed out marking the solution for my issue. The concern was the qtree was having NTFS style of security. I changed it to UNIX. That fixed the issue.

Cheers,

Krish

Public