7MTT Loging Failure

[Ebo_Hagan]

Hello Guys,

I'm migrating from old FAS system to FAS8300 using 7MTT. The copying is done and I'm about to cutover only to realize the login to the 7MTT is failing. I have tried several and I'm 100% certain the login details is the same and haven't changed since I installed the 7MTT. Has anyone experienced this? Please I need help urgently.

Regards.

[Ontapforrum · Accepted solution]

7MTT just requires "credentials" of the "Windows system" on which the tool is installed. Basically, any user who is member of the windows admin group can login. Even if you have forgotten, just use any other account.

Example scenarios:
If you are a member of the Windows "Administrator group" and if you are accessing the tool (web interface) from the server on which it was installed. Just double-click the 7-Mode Transition Tool icon on your desktop. As long as you remember your Windows login credentials you should be good. (Or, Simply create a user and add it to the 'admin group').

If you are member of the Windows "Administrator group" but you have not installed the tool, then:
Use a supported browser to navigate to one of the following URLs:
https://IP_address:port/transition
http://IP_address:port/transition

If you are member of the Windows "Administrator group" and if you are accessing the tool (web interface) from another computer, then:
Use a supported browser to navigate to one of the following URLs:
https://IP_address:port/transition
http://IP_address:port/transition

https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-7mtt-isg%2FGUID-0B09608A-0F27-4FA2-91CA-18E8DDDCBA9C.html

[Ebo_Hagan]

Thank you so much. The issue has been resolved.