ONTAP Discussions

9.8 GUI or CLI for capacity used as percentage

simpsora
1,021 Views

Hi,

 

So we upgraded to 9.8 recently and the new GUI is a bit of a struggle compared to classic mode. It might be just familiarity but does anyone have a way where i can quickly list any volumes that are using more than 97% capacity? if theres a CLI command that can do it then id be fine with that in the meantime. Also i cant seem to say a way to just any volume that hsa say 1TB of free space left,  would there be a command line option for that? i tried volume show-space -fields Logical Available but it didnt have a value and i cant see other fields in show-space that jsut tells me how much space a volume has left.

 

It used to be i could just select the filter box next to the percentage column in system manager and type >97 and it would show the vols that matched but now i cant seem to see how to do that via system manager.

 

Thanks for any help in advance

1 ACCEPTED SOLUTION

Ontapforrum
991 Views

Yes, getting adjusted to the new GUI is not something straight forward, have struggled as well. But, with time, you will get adjusted.

 

Try these commands:

::> vol show -percent-used > 97
::> df -h true -available-space >1TB

::> df -h true -available-space >=1TB

::> df -h true -available-space <=1TB

 

Also, if you have a OCUM/AIQM: That would be much easier and simpler to work with filters.

View solution in original post

1 REPLY 1

Ontapforrum
992 Views

Yes, getting adjusted to the new GUI is not something straight forward, have struggled as well. But, with time, you will get adjusted.

 

Try these commands:

::> vol show -percent-used > 97
::> df -h true -available-space >1TB

::> df -h true -available-space >=1TB

::> df -h true -available-space <=1TB

 

Also, if you have a OCUM/AIQM: That would be much easier and simpler to work with filters.

Public