ONTAP Discussions
ONTAP Discussions
Hi Netapp Team,
I have a new A300 pre-configured with 8 FC LIFs and having 4 CNA port and 4 native FC port. I have 2 brocade FC switches. The native FC ports are both admin up and operationally up. While the CNA ports are admin up but operationally down. I then change the CNA port to FC target port, and reboot the A300. However, the port are admin down and operationally down. How can I fix it? Any command to make it right? Thanks for advice.
Vserver Interface Admin/Oper Address/Mask Node Port Home
----------- ---------- ---------- ------------------ ------------- ------- ----
AFF_SAN_DEFAULT_SVM
SAN_SVM_FCLIF_aff-01_0e
up/down 20:03:00:a0:98:aa:5c:9f
aff-01 0e true
SAN_SVM_FCLIF_aff-01_0f
up/down 20:05:00:a0:98:aa:5c:9f
aff-01 0f true
SAN_SVM_FCLIF_aff-01_0g
up/up 20:07:00:a0:98:aa:5c:9f
aff-01 0g true
SAN_SVM_FCLIF_aff-01_0h
up/up 20:08:00:a0:98:aa:5c:9f
aff-01 0h true
SAN_SVM_FCLIF_aff-02_0e
up/down 20:00:00:a0:98:aa:5c:9f
aff-02 0e true
SAN_SVM_FCLIF_aff-02_0f
up/down 20:01:00:a0:98:aa:5c:9f
aff-02 0f true
SAN_SVM_FCLIF_aff-02_0g
up/up 20:04:00:a0:98:aa:5c:9f
aff-02 0g true
SAN_SVM_FCLIF_aff-02_0h
up/up 20:06:00:a0:98:aa:5c:9f
aff-02 0h true
Original port config:
aff::> ucadmin show
Current Current Pending Pending Admin
Node Adapter Mode Type Mode Type Status
------------ ------- ------- --------- ------- --------- -----------
aff-01 0e cna target - - online
aff-01 0f cna target - - online
aff-01 0g fc target - - online
aff-01 0h fc target - - online
aff-02 0e cna target - - online
aff-02 0f cna target - - online
aff-02 0g fc target - - online
aff-02 0h fc target - - online
After I change the cna to fc target:
aff::> ucadmin show
Current Current Pending Pending Admin
Node Adapter Mode Type Mode Type Status
------------ ------- ------- --------- ------- --------- -----------
aff-01 0e fc target - - offline
aff-01 0f fc target - - offline
aff-01 0g fc target - - online
aff-01 0h fc target - - online
aff-02 0e fc target - - offline
aff-02 0f fc target - - offline
aff-02 0g fc target - - online
aff-02 0h fc target - - online
Logical Status Network Current Current Is
Vserver Interface Admin/Oper Address/Mask Node Port Home
----------- ---------- ---------- ------------------ ------------- ------- ----
AFF_SAN_DEFAULT_SVM
SAN_SVM_FCLIF_aff-01_0e
down/down 20:03:00:a0:98:aa:5c:9f
aff-01 0e true
SAN_SVM_FCLIF_aff-01_0f
down/down 20:05:00:a0:98:aa:5c:9f
aff-01 0f true
SAN_SVM_FCLIF_aff-01_0g
up/up 20:07:00:a0:98:aa:5c:9f
aff-01 0g true
SAN_SVM_FCLIF_aff-01_0h
up/up 20:08:00:a0:98:aa:5c:9f
aff-01 0h true
SAN_SVM_FCLIF_aff-02_0e
down/down 20:00:00:a0:98:aa:5c:9f
aff-02 0e true
SAN_SVM_FCLIF_aff-02_0f
down/down 20:01:00:a0:98:aa:5c:9f
aff-02 0f true
SAN_SVM_FCLIF_aff-02_0g
up/up 20:04:00:a0:98:aa:5c:9f
aff-02 0g true
SAN_SVM_FCLIF_aff-02_0h
up/up 20:06:00:a0:98:aa:5c:9f
aff-02 0h true
Update!
I modify the network interface to admin up. But the operation status is still down.
aff::> ucadmiin ucadmin show
Current Current Pending Pending Admin
Node Adapter Mode Type Mode Type Status
------------ ------- ------- --------- ------- --------- -----------
aff-01 0e fc target - - online
aff-01 0f fc target - - online
aff-01 0g fc target - - online
aff-01 0h fc target - - online
aff-02 0e fc target - - online
aff-02 0f fc target - - online
aff-02 0g fc target - - online
aff-02 0h fc target - - online
aff::> network interface show
Logical Status Network Current Current Is
Vserver Interface Admin/Oper Address/Mask Node Port Home
----------- ---------- ---------- ------------------ ------------- ------- ----
AFF_SAN_DEFAULT_SVM
SAN_SVM_FCLIF_aff-01_0e
up/down 20:03:00:a0:98:aa:5c:9f
aff-01 0e true
SAN_SVM_FCLIF_aff-01_0f
up/down 20:05:00:a0:98:aa:5c:9f
aff-01 0f true
SAN_SVM_FCLIF_aff-01_0g
up/up 20:07:00:a0:98:aa:5c:9f
aff-01 0g true
SAN_SVM_FCLIF_aff-01_0h
up/up 20:08:00:a0:98:aa:5c:9f
aff-01 0h true
SAN_SVM_FCLIF_aff-02_0e
up/down 20:00:00:a0:98:aa:5c:9f
aff-02 0e true
SAN_SVM_FCLIF_aff-02_0f
up/down 20:01:00:a0:98:aa:5c:9f
aff-02 0f true
SAN_SVM_FCLIF_aff-02_0g
Press <space> to page down, <return> for next line, or 'q' to quit...
up/up 20:04:00:a0:98:aa:5c:9f
aff-02 0g true
Did you fix this issue. I too have same issue. Admin seems to be Up and operational status is down.
Reseating the network port has worked for me.