Add snmp-exporter to NABOX 4.0.x

[YehudaLevi1999]

Good Morning,

I would like to add snmp-exporter to the NABOX, in order to be able to monitor the mcc-ip backend switches (cisco 9336), so we will be able to visual the bandwidth of the ISL ports , so we will know when we need to add more ports or replace those 40Gb ports to 100Gb.

Thanks in advanced.

Y.

[Vikram]

Hi,

    You could get started by referring to "Configuring the snmp_exporter" section on link: https://grafana.com/blog/2022/02/01/an-advanced-guide-to-network-monitoring-with-grafana-and-prometheus/

and for further indepth queries do send an email to [email protected] with a good problem description.

Thanks.

[YehudaLevi1999]

I'm familiar with snmp_exporter, but the question is - if i can deploy the snmp_exporter pod inside na_box ?