ONTAP Discussions

BMC not accessible

BENCRPNETAPP
4,275 Views

Hi,

I have 2 FAS2040 in HA mode. On both of them I used to be able to connect to the BMC. Today one of the two wont let me login. It does not even prompt for a user/password. it only says : server unexpectedly closed network connection. I can ping the IP address though. And if I log in to the FAS2040 and type bmc status I get this :

crpar1b> bmc status

        Baseboard Management Controller:

                Firmware Version:   1.3

                IPMI version:       2.0

                DHCP:               off

                BMC MAC address:    00:XXXXXXXXX

                IP address:         192.168.2.35

                IP mask:            255.255.255.0

                Gateway IP address: 192.168.2.1

                BMC ARP interval:   10 seconds

                BMC has (1) user:   naroot

                ASUP enabled:       on

                ASUP mailhost:      0.0.0.0

                ASUP from:          zgzegzegzg

                ASUP recipients:    sdvsdvsdv

                Uptime:             483 Days, 14:25:03

crpar1b> version

NetApp Release 8.1 7-Mode: Thu Mar 29 13:54:17 PDT 2012

crpar1b>

Any idea on what could be happening here ?

thanks

1 ACCEPTED SOLUTION

BENCRPNETAPP
4,275 Views

In case it might help someone, I just did a "bmc reboot" and it is working again.

This operation does not do any harm ! our CIFS shares were still accessible during the reboot in case you're wondering

View solution in original post

1 REPLY 1

BENCRPNETAPP
4,276 Views

In case it might help someone, I just did a "bmc reboot" and it is working again.

This operation does not do any harm ! our CIFS shares were still accessible during the reboot in case you're wondering

Public