ONTAP Discussions

Highlighted

CIFS migration

Hi

 

I have one FAS2050 with ontap 7.3.3 , need to migrate CIFS shares with permission to FAS2720 with ontap 9.6 

 

Can anyone help to provide best way to do this withtwith steps 

 

Regards

Soumil 

7 REPLIES 7
Highlighted

Re: CIFS migration

Upgrade to the latest ontap release. 
either the newest 9.6p release or 9.7p4

 both support the newest version of the 7mtt 

 

alternatively you could use robocopy our NetApp’s XCP available on the downloads site

Re: CIFS migration

Dear  

 

thanks for the reply, Do i have to upgrade the old NETAPP or NEW , 

 

the 7MTT will do all migration ?

 

 

Highlighted

Re: CIFS migration

7MTT does not support Data ONTAP 7.x

You'll need to create the new shares along with permissions manually and then do a copy of data through the host.

Highlighted

Re: CIFS migration

To clarify @maffo 's comment here - the tool is called the "7 Mode Transition Tool"/7MTT, as "7 Mode" is the old management/provisioning/control model for NetApp systems, but it does not support Data ONTAP 7.x, as it requires 64bit aggregates, which are only supported from Data ONTAP 8.x. This page lists source version requirements - http://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-7mdt-sm%2FGUID-8DBDE4CE-A347-4BBF-9DCA-CEC87B6211E5.html&cp=17_0_0_0_1

 

The FAS2050 can run at most ONTAP 7.3.7, so cannot be supported for a 7MTT managed transition. We're very happy that you've remained a NetApp customer, but we haven't sold the FAS2050 for 9 years, so the generation you skipped in the middle probably would have been one which could have made an easy transition between 7.3.x to 8.1.x and then to 9.6P7 or later.

 

So you will need to manually create the new shares (PowerShell is likely to be your friend) and then ROBOCOPY, XCOPY or XCP the files across from the old system.

Highlighted

Re: CIFS migration

Adding to @AlexDawson  response - NDMPCopy can also be a good solution sometimes (it's not the preferred option, but works - and has its own advantages).

 

Gidi Marcus (Linkedin) - Storage and Microsoft technologies consultant - Hydro IT LTD - UK
Highlighted

Re: CIFS migration

Dear Alex

 

Thanks for the reply, we are having more then 100 shares with multiple sub folders and permissions, 

if we use robocopy then we have to do it per folder wise right?

and also have to create shares and permission , does it have option to replicate it ? then user RoboCopy for DATA

 

 

 

 

 
 
 
Highlighted

Re: CIFS migration

Yes create your configuration and volumes/shares, and you can use a tool like Robocopy to migrate. You can also consider xcp as a possibility. Those tools should copy permissions over as well.

Try the NEW Knowledgebase!
NetApp KB Site
Forums