I have re-configured two CN1610 switches - erase config - and applied 1.2.0.7 and RCF 1.2.
Configured serviceport on both and only one of the switches is avaialble on the network.
SWITCH1
serviceport protocol none
serviceport ip 192.168.0.7 255.255.255.0 192.168.0.1
SWITCH2
serviceport protocol none
serviceport ip 192.168.0.8 255.255.255.0 192.168.0.1
SWITCH2 link light comes on when connected to the patch panel and I can access it via PuTTY
SWITCH1 however, does not light up and SHOW SERVICEPORT shows Interface Status Down
I can swap the network cables between the two switches and the problem stays on SWITCH1
It certainly appears to be a mis-configure of some sort on SWITCH1 itself. What am I missing here?
