ONTAP Discussions

Call home for DISK CONFIGURATION ERROR

Divine

Hello Guys,

 

We just set up a FAS2720. We attached some disk shelves from an older system to the controller after unowning them, but we realized that there were 4 disks that still pointed to the old controller. So we performed a disk zeroing on the first controller; that was successful, but on the second controller the process is stuck in a loop of rebooting. It cannot find any disk, not even the ones on the FAS2720 controller. This is what we have been getting over and over:

 

Oct 19 16:25:29 Power outage protection flash de-staging: 46 cycles
***OS2SP configured successfully***Oct 19 16:26:19 [localhost:cf.ic.sbb:notice]: HA interconnect: SBB Compatibility Event. Compatible partner node found. The interconnect device has been enabled.
Oct 19 16:27:20 [localhost:fal_nvme.partition.status:notice]: Partition 0-1 with capacity 894 GiB status: online.
Oct 19 16:27:53 [localhost:config.noPartnerDisks:error]: No disks were detected for the partner; this node cannot perform takeover correctly.
Oct 19 16:27:53 [localhost:callhome.dsk.config:error]: Call home for DISK CONFIGURATION ERROR
cryptomod_fips: Executing Crypto FIPS Self Tests.
cryptomod_fips: Crypto FIPS self-test: 'CPU COMPATIBILITY' passed.
cryptomod_fips: Crypto FIPS self-test: 'AES-128 ECB, AES-256 ECB' passed.
cryptomod_fips: Crypto FIPS self-test: 'AES-128 CBC, AES-256 CBC' passed.
cryptomod_fips: Crypto FIPS self-test: 'AES-128 GCM, AES-256 GCM' passed.
cryptomod_fips: Crypto FIPS self-test: 'AES-128 CCM' passed.
cryptomod_fips: Crypto FIPS self-test: 'CTR_DRBG' passed.
cryptomod_fips: Crypto FIPS self-test: 'SHA1, SHA256, SHA512' passed.
cryptomod_fips: Crypto FIPS self-test: 'HMAC-SHA1, HMAC-SHA256, HMAC-SHA512' passed.
cryptomod_fips: Crypto FIPS self-test: 'PBKDF2' passed.
cryptomod_fips: Crypto FIPS self-test: 'AES-XTS 128, AES-XTS 256' passed.
cryptomod_fips: Crypto FIPS self-test: 'Self-integrity' passed.
Oct 19 16:27:55 [localhost:raid.autoPart.disabled:notice]: Auto-partitioning is disabled on this system: the system needs a minimum of 8 usable internal hard disks.
WARNING: 0 disks found!

Storage Adapters found:
0 Fibre Channel Storage Adapters found!
2 SAS Adapters found!
0 Parallel SCSI Storage Adapters found!
0 ATA Adapters found!


Select option 4 from the boot menu to choose disks for the root volume and spare core space.
Target Adapters found:
4 Fibre Channel Target Adapters found!
0 iSCSI Target Adapters found!

WARNING: there do not appear to be any disks attached to the system.
No root volume found.
Rebooting... (press ctrl-c during boot to break reboot loop)
Uptime: 3m23s
System rebooting...
BIOS Version: 11.5
Portions Copyright (C) 2014-2018 NetApp, Inc. All Rights Reserved.

Initializing System Memory ...
Loading Device Drivers ...
Configuring Devices ...

CPU = 1 Processor(s) Detected.
Intel(R) Xeon(R) CPU D-1557 @ 1.50GHz (CPU 0)
CPUID: 0x00050664. Cores per Processor = 12
32768 MB System RAM Installed.
SATA (AHCI) Device: SV9MST6D120GLM41NP

  

1 ACCEPTED SOLUTION

SpindleNinja

What are the external shelves and drives?   What's internal?  

 

I have a feeling that it's doing something screwy with RAID TEC and the internal shelves when it tries to create the roots.   

it's been talked about before - https://community.netapp.com/t5/FAS-and-V-Series-Storage-Systems-Discussions/FAS-2720-new-aggregate-not-create/td-p/145463  

 

Try maybe doing the re-init without the attached shelves?  

 

Halt 

detatch external shelves. 

 Park Controller 2 at LOADER>
 Boot Controller 1 in to the boot menu and do opt 9
 Run opt 9a
 Run opt 9b
 
 Wait for the …..  to finish on Controller 1
 Boot Controller2 in to the boot menu
 Run opt 9a
 Run opt 9b
 Wait for Controller 2 to finish.
 Create Cluster

 

View solution in original post

8 REPLIES 8

SpindleNinja

halt both sides.   and since this is new  try option 9a/9b and see where that gets you.  

Divine

Okay. We will try that tomorrow and update you. Thanks.

SpindleNinja

no problem.  opt 9 is kinda like opt4 but with more options.   

Divine

It did not work.  this is what we're seeing.

 

Starting AUTOBOOT press Ctrl-C to abort...
Loading X86_64/freebsd/image1/kernel:0x200000/1056103 0x302000/10666816 0xf2e340/3748248 0x12c14d8/13689912 0x200200/1016 Entry at 0xffffffff80302000
Loading X86_64/freebsd/image1/platform.ko:0x1fd0000/4294256 0x23e8670/591912
Starting program at 0xffffffff80302000
NetApp Data ONTAP 9.6P9
mlx5en: Mellanox Ethernet driver 3.5.0 (November 2018)
mlx5ib: Mellanox Connect-IB Infiniband driver 3.5.0 (November 2018)
ena_rss_init_default_deferred() [TID:100000]: No devclass ena

Copyright (C) 1992-2020 NetApp.
All rights reserved.
*******************************
* *
* Press Ctrl-C for Boot Menu. *
* *
*******************************
cryptomod_fips: Executing Crypto FIPS Self Tests.
cryptomod_fips: Crypto FIPS self-test: 'CPU COMPATIBILITY' passed.
cryptomod_fips: Crypto FIPS self-test: 'AES-128 ECB, AES-256 ECB' passed.
cryptomod_fips: Crypto FIPS self-test: 'AES-128 CBC, AES-256 CBC' passed.
cryptomod_fips: Crypto FIPS self-test: 'AES-128 GCM, AES-256 GCM' passed.
cryptomod_fips: Crypto FIPS self-test: 'CTR_DRBG' passed.
cryptomod_fips: Crypto FIPS self-test: 'SHA1, SHA256, SHA512' passed.
cryptomod_fips: Crypto FIPS self-test: 'HMAC-SHA1, HMAC-SHA256, HMAC-SHA512' passed.
cryptomod_fips: Crypto FIPS self-test: 'PBKDF2' passed.
cryptomod_fips: Crypto FIPS self-test: 'AES-XTS 128, AES-XTS 256' passed.
cryptomod_fips: Crypto FIPS self-test: 'Self-integrity' passed.
Tue Oct 20 13:21:34 2020 [nv2flash.restage.progress:NOTICE]: ReStage is not needed because the flash has no data.
Starting DHCP client on e0M


Oct 20 13:22:55 Power outage protection flash de-staging: 45 cycles
***OS2SP configured successfully***Oct 20 13:23:45 [localhost:cf.ic.sbb:notice]: HA interconnect: SBB Compatibility Event. Compatible partner node found. The interconnect device has been enabled.
Oct 20 13:24:46 [localhost:fal_nvme.partition.status:notice]: Partition 0-1 with capacity 894 GiB status: online.
Oct 20 13:25:20 [localhost:config.noPartnerDisks:error]: No disks were detected for the partner; this node cannot perform takeover correctly.
Oct 20 13:25:20 [localhost:callhome.dsk.config:error]: Call home for DISK CONFIGURATION ERROR
cryptomod_fips: Executing Crypto FIPS Self Tests.
cryptomod_fips: Crypto FIPS self-test: 'CPU COMPATIBILITY' passed.
cryptomod_fips: Crypto FIPS self-test: 'AES-128 ECB, AES-256 ECB' passed.
cryptomod_fips: Crypto FIPS self-test: 'AES-128 CBC, AES-256 CBC' passed.
cryptomod_fips: Crypto FIPS self-test: 'AES-128 GCM, AES-256 GCM' passed.
cryptomod_fips: Crypto FIPS self-test: 'CTR_DRBG' passed.
cryptomod_fips: Crypto FIPS self-test: 'SHA1, SHA256, SHA512' passed.
cryptomod_fips: Crypto FIPS self-test: 'HMAC-SHA1, HMAC-SHA256, HMAC-SHA512' passed.
cryptomod_fips: Crypto FIPS self-test: 'PBKDF2' passed.
cryptomod_fips: Crypto FIPS self-test: 'AES-XTS 128, AES-XTS 256' passed.
cryptomod_fips: Crypto FIPS self-test: 'Self-integrity' passed.
Oct 20 13:25:22 [localhost:raid.autoPart.disabled:notice]: Auto-partitioning is disabled on this system: the system needs a minimum of 8 usable internal hard disks.
WARNING: 0 disks found!

Storage Adapters found:
0 Fibre Channel Storage Adapters found!
2 SAS Adapters found!

0 Parallel SCSI Storage Adapters found!
0 ATA Adapters found!

Select option 4 from the boot menu to choose disks for the root volume and spare core space.
Target Adapters found:
4 Fibre Channel Target Adapters found!
0 iSCSI Target Adapters found!

WARNING: there do not appear to be any disks attached to the system.
No root volume found.
Rebooting... (press ctrl-c during boot to break reboot loop)
Uptime: 3m54s
System rebooting...
BIOS Version: 11.5
Portions Copyright (C) 2014-2018 NetApp, Inc. All Rights Reserved.

Initializing System Memory ...
Loading Device Drivers ...
Configuring Devices ...

CPU = 1 Processor(s) Detected.
Intel(R) Xeon(R) CPU D-1557 @ 1.50GHz (CPU 0)
CPUID: 0x00050664. Cores per Processor = 12
32768 MB System RAM Installed.
SATA (AHCI) Device: SV9MST6D120GLM41NP

Boot Loader version 6.0.6
Copyright (C) 2000-2003 Broadcom Corporation.
Portions Copyright (C) 2002-2018 NetApp, Inc. All Rights Reserved.

SpindleNinja

What are the external shelves and drives?   What's internal?  

 

I have a feeling that it's doing something screwy with RAID TEC and the internal shelves when it tries to create the roots.   

it's been talked about before - https://community.netapp.com/t5/FAS-and-V-Series-Storage-Systems-Discussions/FAS-2720-new-aggregate-not-create/td-p/145463  

 

Try maybe doing the re-init without the attached shelves?  

 

Halt 

detatch external shelves. 

 Park Controller 2 at LOADER>
 Boot Controller 1 in to the boot menu and do opt 9
 Run opt 9a
 Run opt 9b
 
 Wait for the …..  to finish on Controller 1
 Boot Controller2 in to the boot menu
 Run opt 9a
 Run opt 9b
 Wait for Controller 2 to finish.
 Create Cluster

 

View solution in original post

Divine

this option worked. Both controllers are up and can see the attached disks. thank you.🙏🙏🙏 

Divine

We will try this option and feedback. thank you.

SpindleNinja

no problem.   This is the BURT I was thinking about.  https://mysupport.netapp.com/site/bugs-online/product/ONTAP/BURT/948840 

 

You should be patched,  but..   worth trying the bootarg.raid.allow-raid-tec work around. 

 

if that still doesn't work, open a ticket at this point IMHO. 

Announcements
NetApp on Discord Image

We're on Discord, are you?

Live Chat, Watch Parties, and More!

Explore Banner

Meet Explore, NetApp’s digital sales platform

Engage digitally throughout the sales process, from product discovery to configuration, and handle all your post-purchase needs.

NetApp Insights to Action
I2A Banner
Public