Change the IP address - FAS8300

[Arz]

Dear Team,

We have two node FAS8300 and would like to change the IP address  Subnet-

Please advise  that what are the steps and procedures to do this task.(Currently we didn't connected any host with netapp)

please share cmd line for changing ip address. 

Thank you in advance.

Cluster Management IP Address

Node Management IP Address

Service Processor IP Address

iSCSI IP Address

CIFS IP Address

[RossC]

Hi @Arz 

This KB article might be a good starting point for you to work through changing your ONTAP based systems IP Addressing - https://kb.netapp.com/Advice_and_Troubleshooting/Data_Storage_Systems/FAS_Systems/How_to_reconfigure_IP_addresses_in_ONTAP_9

Hope this helps. 

[weiliu]

You can use the following command to change your IP address

network interface modify -vserver svm_name -lif lif_name -address new_address

[weiliu]

You can use the following command to change your IP address

network interface modify -vserver svm_name -lif lif_name -address new_address