ONTAP Discussions
ONTAP Discussions
Hi
After the upgrade of a controller, FAS3020c to FAS3140A, by swapping the heads only. All the luns were offline, and after onlining the lun with the same lun ID, all the datastore have been seen like snapshot in Vmware because the uid off the LUN had change, an we had to reconfigure all the VM : delete from the inventory, browse again the datastore, add again to the inventory and for linux modify the ethernet file as the MAC address change and reassociate the RDM devices.
The other platform, Xen and Windows didn't ssen to have been perturbated by the upgrade
Do you know how to avoid this problem, ?
Could the use of the options "cf.takeover.change_fsid" , like in the metrocluster be a solution or is there any VM a solution in Vmware?
Best Regards
Jean Luc
No, you can't use that option. What you could do after the head swap is to set the orginial serialnumber back on the luns.
priv set advanced
lun serial <lun_path> [ <serial> ]
Thanks
but there is no solutions more user friendly ?
Best regards
Jean Luc
I don't think the described methot is particularly un-friendly - it's just a couple of commands.
Other than that I think setting "allow resignature" on VMware side may help:
http://communities.vmware.com/thread/213609
Regards,
Radek
Yes, user friendly solution is to create a script that you will run before swap to save current serial and after swap to set old serial, it is pretty simple script, no more than a few lines of bash, PERL guru would make it probably a oneliner
Thanks everybody
I found a vbs script developped by Karel Verhelst, so that's nice
best regards