ONTAP Discussions
ONTAP Discussions
Hi All,
Please find the "sysconfig" outputs from our FAS3170 HA Pair. We are planning to upgrade DOT from 8.0.1P4 7-Mode to 8.1.3 P3 7-Mode.
This system is single pathed HA. Is it possible to do NDU?
Filer-A> sysconfig
NetApp Release 8.0.1P4 7-Mode: Sat Apr 2 13:41:25 PDT 2011
System Rev: A0
System Storage Configuration: Single-Path HA
System ACP Connectivity: NA
slot 0: System Board
Processors: 4
Processor type: Opteron
Memory Size: 16384 MB
Memory Attributes: Node Interleaving
Bank Interleaving
Hoisting
Chipkill ECC
Controller: A
Remote LAN Module Status: Online
slot 0: Internal BGE 10/100 Ethernet Controller
e0M MAC Address: 00:a0:98:0d:d3:62 (auto-100tx-fd-up)
slot 0: BGE 10/100/1000 Ethernet Controller
e0a MAC Address: 00:a0:98:0d:d3:60 (auto-1000t-fd-up)
e0b MAC Address: 00:a0:98:0d:d3:61 (auto-1000t-fd-up)
slot 0: ATA/IDE Adapter 0e (0x000001f0)
0e.0 STEC NACF1GM1U-B11 01/17/07 977MB 512B/sect (STI1MNK408176134257)
slot 0: NVRAM
Memory Size: 2048 MB
Running Firmware: 4 (4.8.940)
Cluster Interconnect Port 1: 4x copper
Cluster Interconnect Port 2: 4x copper
slot 0: Fibre Channel Target Host Adapter 0a
slot 0: Fibre Channel Target Host Adapter 0b
slot 0: Fibre Channel Target Host Adapter 0c
slot 0: Fibre Channel Target Host Adapter 0d
slot 1: FC Host Adapter 1a
slot 1: FC Host Adapter 1b
42 Disks: 11424.0GB
3 shelves with ESH4
slot 1: FC Host Adapter 1c
28 Disks: 7616.0GB
2 shelves with ESH4
slot 1: FC Host Adapter 1d
14 Disks: 5923.5GB
1 shelf with AT-FCX
slot 2: FC Host Adapter 2a
slot 2: FC Host Adapter 2b
slot 2: FC Host Adapter 2c
slot 2: FC Host Adapter 2d
slot 4: Quad 10/100/1000 Ethernet Controller G20
e4a MAC Address: 00:15:17:95:a7:b4 (auto-unknown-down)
e4b MAC Address: 00:15:17:95:a7:b5 (auto-unknown-down)
e4c MAC Address: 00:15:17:95:a7:b6 (auto-unknown-down)
e4d MAC Address: 00:15:17:95:a7:b7 (auto-unknown-down)
Filer-A>
Filer-B> sysconfig
NetApp Release 8.0.1P4 7-Mode: Sat Apr 2 13:41:25 PDT 2011
System Rev: A0
System Storage Configuration: Single-Path HA
System ACP Connectivity: NA
slot 0: System Board
Processors: 4
Processor type: Opteron
Memory Size: 16384 MB
Memory Attributes: Node Interleaving
Bank Interleaving
Hoisting
Chipkill ECC
Controller: B
Remote LAN Module Status: Online
slot 0: Internal BGE 10/100 Ethernet Controller
e0M MAC Address: 00:a0:98:0d:d3:6e (auto-100tx-fd-up)
slot 0: BGE 10/100/1000 Ethernet Controller
e0a MAC Address: 00:a0:98:0d:d3:6c (auto-1000t-fd-up)
e0b MAC Address: 00:a0:98:0d:d3:6d (auto-1000t-fd-up)
slot 0: ATA/IDE Adapter 0e (0x000001f0)
0e.0 STEC NACF1GM1U-B11 01/17/07 977MB 512B/sect (STI1MNX108176135025)
slot 0: NVRAM
Memory Size: 2048 MB
Running Firmware: 4 (4.8.940)
Cluster Interconnect Port 1: 4x copper
Cluster Interconnect Port 2: 4x copper
slot 0: Fibre Channel Target Host Adapter 0a
slot 0: Fibre Channel Target Host Adapter 0b
slot 0: Fibre Channel Target Host Adapter 0c
slot 0: Fibre Channel Target Host Adapter 0d
slot 1: FC Host Adapter 1a
42 Disks: 11424.0GB
3 shelves with ESH4
slot 1: FC Host Adapter 1b
slot 1: FC Host Adapter 1c
14 Disks: 5923.5GB
1 shelf with AT-FCX
slot 1: FC Host Adapter 1d
28 Disks: 7616.0GB
2 shelves with ESH4
slot 2: FC Host Adapter 2a
slot 2: FC Host Adapter 2b
slot 2: FC Host Adapter 2c
slot 2: FC Host Adapter 2d
slot 4: Quad 10/100/1000 Ethernet Controller G20
e4a MAC Address: 00:15:17:95:a7:c0 (auto-1000t-fd-down)
e4b MAC Address: 00:15:17:95:a7:c1 (auto-unknown-down)
e4c MAC Address: 00:15:17:95:a7:c2 (auto-unknown-down)
e4d MAC Address: 00:15:17:95:a7:c3 (auto-unknown-down)
Filer-B>
Regards,
Dhakshinamoorthy Balasubramanian
Solved! See The Solution
Yes, it is possible.
Yes, it is possible.
Thanks
hi dhakshina,
single path or multi path both possible NDU, but CIFS only disconnect during the DOT....
Do we need to disconnect/terminate CIFS session?