Hi All,
Please find the "sysconfig" outputs from our FAS3170 HA Pair. We are planning to upgrade DOT from 8.0.1P4 7-Mode to 8.1.3 P3 7-Mode.
This system is single pathed HA. Is it possible to do NDU?
Filer-A> sysconfig
NetApp Release 8.0.1P4 7-Mode: Sat Apr 2 13:41:25 PDT 2011
System Rev: A0
System Storage Configuration: Single-Path HA
System ACP Connectivity: NA
slot 0: System Board
Processors: 4
Processor type: Opteron
Memory Size: 16384 MB
Memory Attributes: Node Interleaving
Bank Interleaving
Hoisting
Chipkill ECC
Controller: A
Remote LAN Module Status: Online
slot 0: Internal BGE 10/100 Ethernet Controller
e0M MAC Address: 00:a0:98:0d:d3:62 (auto-100tx-fd-up)
slot 0: BGE 10/100/1000 Ethernet Controller
e0a MAC Address: 00:a0:98:0d:d3:60 (auto-1000t-fd-up)
e0b MAC Address: 00:a0:98:0d:d3:61 (auto-1000t-fd-up)
slot 0: ATA/IDE Adapter 0e (0x000001f0)
0e.0 STEC NACF1GM1U-B11 01/17/07 977MB 512B/sect (STI1MNK408176134257)
slot 0: NVRAM
Memory Size: 2048 MB
Running Firmware: 4 (4.8.940)
Cluster Interconnect Port 1: 4x copper
Cluster Interconnect Port 2: 4x copper
slot 0: Fibre Channel Target Host Adapter 0a
slot 0: Fibre Channel Target Host Adapter 0b
slot 0: Fibre Channel Target Host Adapter 0c
slot 0: Fibre Channel Target Host Adapter 0d
slot 1: FC Host Adapter 1a
slot 1: FC Host Adapter 1b
42 Disks: 11424.0GB
3 shelves with ESH4
slot 1: FC Host Adapter 1c
28 Disks: 7616.0GB
2 shelves with ESH4
slot 1: FC Host Adapter 1d
14 Disks: 5923.5GB
1 shelf with AT-FCX
slot 2: FC Host Adapter 2a
slot 2: FC Host Adapter 2b
slot 2: FC Host Adapter 2c
slot 2: FC Host Adapter 2d
slot 4: Quad 10/100/1000 Ethernet Controller G20
e4a MAC Address: 00:15:17:95:a7:b4 (auto-unknown-down)
e4b MAC Address: 00:15:17:95:a7:b5 (auto-unknown-down)
e4c MAC Address: 00:15:17:95:a7:b6 (auto-unknown-down)
e4d MAC Address: 00:15:17:95:a7:b7 (auto-unknown-down)
Filer-A>
Filer-B> sysconfig
NetApp Release 8.0.1P4 7-Mode: Sat Apr 2 13:41:25 PDT 2011
System Rev: A0
System Storage Configuration: Single-Path HA
System ACP Connectivity: NA
slot 0: System Board
Processors: 4
Processor type: Opteron
Memory Size: 16384 MB
Memory Attributes: Node Interleaving
Bank Interleaving
Hoisting
Chipkill ECC
Controller: B
Remote LAN Module Status: Online
slot 0: Internal BGE 10/100 Ethernet Controller
e0M MAC Address: 00:a0:98:0d:d3:6e (auto-100tx-fd-up)
slot 0: BGE 10/100/1000 Ethernet Controller
e0a MAC Address: 00:a0:98:0d:d3:6c (auto-1000t-fd-up)
e0b MAC Address: 00:a0:98:0d:d3:6d (auto-1000t-fd-up)
slot 0: ATA/IDE Adapter 0e (0x000001f0)
0e.0 STEC NACF1GM1U-B11 01/17/07 977MB 512B/sect (STI1MNX108176135025)
slot 0: NVRAM
Memory Size: 2048 MB
Running Firmware: 4 (4.8.940)
Cluster Interconnect Port 1: 4x copper
Cluster Interconnect Port 2: 4x copper
slot 0: Fibre Channel Target Host Adapter 0a
slot 0: Fibre Channel Target Host Adapter 0b
slot 0: Fibre Channel Target Host Adapter 0c
slot 0: Fibre Channel Target Host Adapter 0d
slot 1: FC Host Adapter 1a
42 Disks: 11424.0GB
3 shelves with ESH4
slot 1: FC Host Adapter 1b
slot 1: FC Host Adapter 1c
14 Disks: 5923.5GB
1 shelf with AT-FCX
slot 1: FC Host Adapter 1d
28 Disks: 7616.0GB
2 shelves with ESH4
slot 2: FC Host Adapter 2a
slot 2: FC Host Adapter 2b
slot 2: FC Host Adapter 2c
slot 2: FC Host Adapter 2d
slot 4: Quad 10/100/1000 Ethernet Controller G20
e4a MAC Address: 00:15:17:95:a7:c0 (auto-1000t-fd-down)
e4b MAC Address: 00:15:17:95:a7:c1 (auto-unknown-down)
e4c MAC Address: 00:15:17:95:a7:c2 (auto-unknown-down)
e4d MAC Address: 00:15:17:95:a7:c3 (auto-unknown-down)
Filer-B>
Regards,
Dhakshinamoorthy Balasubramanian