Disk Pool Failed - Volume: Over Threshold

[NSE_IT]

Hi There,

I'm facing an issue with our Netapp, where the repository reached 100% of capacity usage which led to a Failed Disk pool and an over threshold Volume 

For information,

Disk pool Capacity: 400 TB

Volume: 50TB

Repository: 10TB

The setting for the Thin Volume was set to "Manual" 

I can increase volume capacity but I can't increase the Repository capacity, I always git an error message:

Error 651 - The operation cannot complete because the repository volume associated with the reserved capacity is in a failed state.

Operation when error occurred: PROC_expandConcatVolume

Also, when I try to change the setting for the Thin Volume to "Automatic", I'm getting this error:

Error 18 - The operation cannot complete because of an internal target error. Please retry the operation. If this message persists, contact your Technical Support Representative.

Operation when error occurred: PROC_setThinVolumeCapacityThreshold

Can you please advise how to do to solve this issue, since the storage is no more available on the ESXi servers 

Best Regards,

[Krishnadas]

Above error should be on SANTRICITY OS? What is the version of the code running?  Have you tried expanding the Volume? 

[Amitra · Accepted solution]

HI @NSE_IT ,

Considering there is a disk pool failure, I recommend reaching out to NetApp Support by creating a case.