I am getting the following messages in Syslog:
AUTO TERMINATION ERROR: TERM switch set improperly to ESH A on channels 4a/PARTNER shelf id 1
Shelf previously connected to OUT port of ESH A on channels 4a/PARTNER shelf id 1 is now inaccessible!
AUTO TERMINATION ERROR: TERM switch set improperly to ESH B on channels 4a/PARTNER shelf id 1
Shelf previously connected to OUT port of ESH B on channels 4a/PARTNER shelf id 1 is now inaccessible!
All the disks are accessible and there are no users reporting problems.
The ESH2 that are in this shelf do not have a term switch on them?
System is a FS3020 running 7.1 all the disk shelves are up to the latest firmware.
The system was powered off two days ago for maintenance, I reseated the ESH modules and replaced the fibre cables to the shelf.
