Hello,
This bug is talking about update of the esh2 of shelf controleur.
On my side the problem is not on a shelf but on a FC port who is connected directly to a lto6 driver
I have a quantum I500 and 2 drive of the quantum is directly connected by a fiber on my FAS 3210
The 2 port on the Netapp is the 0c and 0d
slot 0: FC Host Adapter 0c (QLogic 2432 rev. 2, L-port, <UP>)
Firmware rev: 5.4.100
Host Loop Id: 7
FC Node Name: 5:00a:098000:9027c0
FC Port Name: 5:00a:098000:9027c0
SFP Vendor: AVAGO
SFP Part Number: AFBR-57R6APZ-NA1
SFP Serial Number: B9104093V4
SFP Capabilities: 1, 2 or 4 Gbit
Link Data Rate: 4 Gbit
61: Tape: Hewlett-Packard LTO-6 J2AZ (F3A143A000)
I/O base 0x0000000000002000, size 0x100
memory mapped I/O base 0xdfb00000, size 0x4000
slot 0: FC Host Adapter 0d (QLogic 2432 rev. 2, L-port, <DOWN>)
Firmware rev: 5.4.100
Host Loop Id: 0
FC Node Name: 5:00a:098100:9027c0
FC Port Name: 5:00a:098100:9027c0
SFP Vendor: AVAGO
SFP Part Number: AFBR-57R6APZ-NA1
SFP Serial Number: B9104093XY
SFP Capabilities: 1, 2 or 4 Gbit
Link Data Rate: N/A
I can see only one drive
Tape drive (0c.61) Hewlett-Packard LTO-6
rst3l - rewind device, format is: LTO-4/5 Native Density
nrst3l - no rewind device, format is: LTO-4/5 Native Density
urst3l - unload/reload device, format is: LTO-4/5 Native Density
rst3m - rewind device, format is: LTO-4/5 Compressed
nrst3m - no rewind device, format is: LTO-4/5 Compressed
urst3m - unload/reload device, format is: LTO-4/5 Compressed
rst3h - rewind device, format is: LTO-6 2.5TB
nrst3h - no rewind device, format is: LTO-6 2.5TB
urst3h - unload/reload device, format is: LTO-6 2.5TB
rst3a - rewind device, format is: LTO-6 6.25TB Compressed
nrst3a - no rewind device, format is: LTO-6 6.25TB Compressed
urst3a - unload/reload device, format is: LTO-6 6.25TB Compressed
fci.link.error:error]: Could not recover link on Fibre Channel adapter 0d after 30 seconds. Offlining the adapter.
fci.adapter.error:warning]: Fibre Channel adapter driver encountered error "Failed to get connection type" on adapter 0d.
If you have an idée?
Thanks
Stéphane