How can I do persistent Network's Configuration ?

[mapaadmin]

Hi,

I'd like some help in Data Ontap OS, please. Every time I reboot the NetApp and it start up again, it always lose the network's configuration, such as all VLANs and Virtual interfaces that I have configured, so I have to connect the console's cable and to configure network's interfaces again.  Is there some thing I can do to solve this problem?

thanks

Wneiton

[ekashpureff · Accepted solution]

You have to put all of your network configuration statements in the /etc/rc startup script.

I hope this response has been helpful to you.

At your service,

Eugene E. Kashpureff
[email protected]
NetApp Instructor and Independent Consultant
http://www.linkedin.com/in/eugenekashpureff

(P.S. I appreciate points for helpful or correct answers.)

[mladen_zecevic]

Hi Wneiton,

You have to enter the configuration in the /etc/rc file. The file is generated when running setup, but if you need to change only network settings you need to edit /etc/rc.

Regards,

Mladen