How to find NetApp part # installed in a system?

[ACHOU_SIMG]

Hi,

I have a FAS8040HA 2-node cluster running cDOT 8.3 and I'd like to find out the NetApp part # for the FC HBA installed in the nodes. I can find

        slot 4: FC Host Adapter 4a (QLogic 2532 rev. 2, L-port, <OFFLINE (hard)>)
                Board name:        QLE2564
                Serial Number:     RFD1330N05017
                Firmware rev:      5.4.130
                Preload Rev:       2.6.0
                Host Loop Id:      0
                FC Node Name:      2:000:0024ff:6c4b04
                FC Port Name:      2:100:0024ff:6c4b04
                SFP Vendor:        FINISAR CORP.
                SFP Part Number:   FTLF8528P3BCV-QL
                SFP Serial Number: PPL44HC
                SFP Capabilities:  2, 4 or 8 Gbit

but I'd like to know the part #. Is there a way to find it from command line?

Thanks,

Andy

[AlexSun0302 · Accepted solution]

you can use node shell and command "sysconfig -ac", will show the parts model.

[Izzool]

I am supporting Customer with multiple NetApp storage profiles.

How do I get part number informations from each node/shelves/slots as I need to provide them parts inventory as Maintenance Support Documentations?

Should there be a Service/Manual Guides for every products for BOM with part numbers and details documentations?

- Zull -

[GidonMarcus]

Please speak about that directly with NetApp. they have tools for authorized 3rd parties to manage inventory.