ONTAP Discussions

IOM6 to IOM12 upgrade, performance results?

Maurice-FreeOnes
26,546 Views

Hello,

 

I am thinking about upgrading the complete FAS2750 stack we have from IOM6 to IOM12. Does anybody have any experience with the performance increase when doing this? The SAS and SSD disks we have do all support 12 Gb/s, only not the SATA shelf. I am wondering or it's worth the money to upgrade all IOM6 to IOM12 modules. In theory there should be a 100% perofrmance increase isn't it?

 

Regards, Maurice

14 REPLIES 14

SpindleNinja
26,504 Views

the shelf is still a DS2246 though right?     the backplane runs at 6.  

paul_stejskal
26,470 Views

I've only seen 6Gb/s be a bottleneck on high end AFFs. You have to be pumping over 1 GB/s through them disks to even begin to hit limits. Don't forget you have 4 PHYs, so you get 24Gb of througput functionally, or about 3 GB/s per stack.

Maurice-FreeOnes
7,179 Views

Ok we are more than 1 year later. We have mixed cluster IOM6 and IOM12. Do you think it makes sense to upgrade all IOM6 to IOM12 now? Also way more SSD's have been added/replaced to the cluster

 

See the current situation for example:

cluster-cl-001::*> volume move show -vserver * -volume * -fields replication-throughput
vserver volume replication-throughput
------------------- ----------------------- ----------------------
svm_iscsi_001 volume-name-001_vol_004 -
svm_iscsi_001 volume-name-001_vol_005 189.9MB/s
svm_iscsi_001 volume-name-002_vol_005 355.5MB/s
svm_iscsi_001 volume-name-003_vol_001 480.4MB/s
svm_iscsi_001 volume-name-003_vol_003 485.0MB/s
svm_iscsi_001 volume-name-004_vol_004 436.6MB/s
svm_iscsi_001 volume-name-004_vol_005 165.1MB/s
svm_iscsi_001 volume-name-006_vol_003 455.7MB/s
svm_iscsi_001 volume-name-008_vol_001 205.2MB/s
svm_nfs_001 volume-name-_001 5.22MB/s
svm_nfs_001 volume-name-_006 104.7MB/s
svm_nfs_001 volume-name-_002 162.4MB/s
svm_nfs_001 volume-name-003 266.5MB/s
13 entries were displayed.

 

Not counting regular throughput, only volume moves I have running now.

Maurice-FreeOnes
26,415 Views

This is on of our stacks:

 


XXXXXX::> storage shelf show

Module Operational
Shelf Name Shelf ID Serial Number Model Type Status
----------------- -------- --------------- ----------- ------ -----------
1.0 0 XXXXXXXXXXXXXXX DS224-12 IOM12E Normal
1.1 1 XXXXXXXXXXXXXXX DS2246 IOM6 Normal
1.2 2 XXXXXXXXXXXXXXX DS2246 IOM6 Normal
1.3 3 XXXXXXXXXXXXXXX DS4246 IOM6 Normal
1.4 4 XXXXXXXXXXXXXXX DS224-12 IOM12 Normal
4.0 0 XXXXXXXXXXXXXXX DS224-12 IOM12E Normal
4.1 1 XXXXXXXXXXXXXXX DS2246 IOM6 Normal
4.2 2 XXXXXXXXXXXXXXX DS2246 IOM6 Normal
4.3 3 XXXXXXXXXXXXXXX DS4246 IOM6 Normal
4.4 4 SHFGD1703000417 DS224-12 IOM12 Normal
10 entries were displayed.

 

Our SAS disks can run on 12 Gb/s, our SATA have a 6 Gb/s limit.

It's the plan to replace all IOM6 for IOM12 if that brings a performance boost.

aborzenkov
26,412 Views

I wonder if such configuration is supported. According to current documentation, only one transition between IOM6 to IOM12 is allowed and here there are two transitions.

Daniel_66
26,392 Views

As per "12Gb SAS SE Presentation_v1.5.1.pptx" in Field portal, multiple stack transitions between IOM6 and IOM3 are permitted with ONTAP 9.2P1 or later.

 
 

捕获.JPG

 

 

SpindleNinja
26,389 Views

You're talking 6 and 12 though.  where did 3 come in to play here? 

 

from the 12GbSAS deck - A maximum of one transition from 12Gbps to 6Gbps modules is supported

 

What does config advisor say when you run it at this system? 

 

 

 

 

Maurice-FreeOnes
26,368 Views

1225017 - ONTAP support for mixing IOM6-based and IOM12-based shelves in the same stack

 

https://mysupport.netapp.com/site/bugs-online/product/ONTAP/BURT/1225017

SpindleNinja
26,349 Views

Right "  Only one speed transition is allowed."   like their example: 

Controller <-> IOM6 <-> IOM6 <---> IOM12 <-> IOM12 <-> Controller

 

From your output it looks like you're doing: 

 

controller -> 12 -> 6 -> 6-> 12 -> controller  

aborzenkov
26,314 Views

@SpindleNinja wrote:

from the 12GbSAS deck - A maximum of one transition from 12Gbps to 6Gbps modules is supported


It is a bit unclear whether embedded IOM (IOM12E) is counted here (it says "external stack" about entry systems). Also it seems the primary use case for lifting this restriction is extending existing IOM6 stacks by IOM12 shelves. So I am not sure if even IOM12E - IOM12 - IOM6 - IOM6 would be valid ("IOM6 CIRCLE ports must be used for connection to IOM12 ports" and when going from IOM12 to IOM6 we connect IOM6 with SQUARE port ...).

 

So it amounts to - is IOM12E - IOM6 speed transition or simply (IOM6) stack attachment?

SpindleNinja
26,281 Views

Fair point.   

 

I wonder what AIQ Config advisor will say. @Maurice-FreeOnes have you run config advisor against this? 

 

Maurice-FreeOnes
26,249 Views

I first have to upgrade ONTAP and will then do the check and get back here with the results.

luiz_silva
24,645 Views

Hi,

Would you have already an answer for this?  

I think I have similar situation:

 

Current configuration:

Controller 2750 + External Shelf DS224C with IOM12 

 

Is it possible to add the end of this a DS2246 Shelf with IOM6  ?  (not very common scenery and there is a NOTE regarding IOM6 Square Port that cannot be connect to IOM12 ports).

 

 

 

Maurice-FreeOnes
7,179 Views

Where / how can I check the best for total throughput of the cluster?

Public