ONTAP Discussions
ONTAP Discussions
Hi Everyone,
We’re facing an issue while configuring LDAP on a NetApp array (version 9.16) and need some guidance. Here’s the procedure and details of what we’ve tried so far:
LDAP Server Details:
Steps Taken:
SSH :
We successfully created the LDAP client via the following command:
Error When Running the Following Command:
We encounter the error:
GUI Configuration:
Issue Summary: We are unable to configure the LDAP client in NetApp, even though we’ve tried both the GUI and SSH methods. The error indicates network-related issues with the connection to the LDAP server, specifically a failure to contact DNS and reach the LDAP server at port 389.
Questions:
Any insights or suggestions would be greatly appreciated!
Thanks in advance!
Solved! See The Solution
hello:
It looks like there is no domain controller created and DNS is not created or configured incorrectly. If there is no configuration, it needs to be configured. The following article I hope can help you
https://docs.netapp.com/zh-cn/ontap/nfs-config/using-ldap-concept.html
Best regards!
Network unreachable usually indicates a routing issue. Does the vserver have a gateway defined? Can you ping the ldap server from inside the svm?
Hi @TMACMD ,
Able to ping the ldap server from svm
netapp-c1::> net ping -node nodename -vserver vservername -destination 10.x.x.x
(network ping)
10.x.x.x is alive
hello:
It looks like there is no domain controller created and DNS is not created or configured incorrectly. If there is no configuration, it needs to be configured. The following article I hope can help you
https://docs.netapp.com/zh-cn/ontap/nfs-config/using-ldap-concept.html
Best regards!