Hello all
Let me explain the configuration. This is a Strech MCC, all working with iSCSI conections, and when I execute metrocluster check run I've got one warning:
Component Result
------------------- ---------
nodes ok
lifs warning
config-replication ok
aggregates ok
clusters ok
5 entries were displayed.
LIF placement Failure Type: There are no ports on node <nodename> the destination cluster that have the adapter type "NIC" in IPspace "Default" required to host the secondary Vserver <vservername> iSCSI LIF <lif_name>
There are no ports on node <nodename>in the destination cluster that have the adapter type "CNA" in IPspace "Default" required to host the secondary Vserver <vservername>iSCSI LIF <lif_name>.
And that is because in site A we make the iSCSI connections through nic and cna ports and in site B the opposite:
SAN A nic -------- cna SAN A
SAN B cna ------- nic. SAN B
I was serching and found this Kb: https://kb.netapp.com/support/s/article/metrocluster-lif-is-not-using-the-expected-interface-on-the-partner-cluster?language=en_US
That is very similar but not the same case... So my question: is this a supported configuration and the warning is only "cosmetic"?
Many thanks in advanced.
Kind regards,
J. Salas.
