Hi,
On Cdot 8.2.2P2 with a 4 nodes cluster I have the following configuration:
Node 1 e0m/SP are on 10.x.x.12 and 13 for node management en Service Processor
Node 2 e0m/SP are on 10.x.x.14 and 15
Node 3 e0m/SP are on 10.x.x.16 and 17
Node 4 e0m/SP are on 10.x.x.18 and 19
SVM for cluster admin 10.x.x.20 for remote administration (ssh/On Comand)
Node 1 e0a
Node 2 e0a
Node 3 e0a
Node 4 e0a
Actually, they are on same switch/Network but customer would like to spread Cluster Management and Admin to different Network/Switch like below:
Node 1 e0m/SP are on 11.x.x.12 and 13 for node management en Service Processor
Node 2 e0m/SP are on 11.x.x.14 and 15
Node 3 e0m/SP are on 11.x.x.16 and 17
Node 4 e0m/SP are on 11.x.x.18 and 19
SVM for cluster management 192.x.x.20 for remote administration (ssh/On Comand)
Node 1 e0a
Node 2 e0a
Node 3 e0a
Node 4 e0a
I assume it should work but would like to double check so do you have already seen this kind of configuration? any issue with remote management ?
Any document related to this kind of configuration ?
Best Regards
Eric
