ONTAP Discussions

Missing disks DS14MK4

AvdS
8,898 Views

I have a old Netapp running ontap 7.3.

The system has not been used for some time now, before it was shut down it was working fine.

 

Now when I try to start, it boots with the error that there are not enough spare disks for the aggregation.

After some debugging I found that the all disks led's flashing green expect for 2, these stay solid green.

 

When I run "show disk -v" the missing disks are not displayed, but when I do "sysconfig -a" the missing disks are displayed together with all other disks.

The weird thing is that they are showed as 0.0GB 0B/sect instead of 272.0GB 520B/sect

 

Does this mean that the disk are broken and should be replaced?

I would expect amber led when the disk was malfunctioning, or is that a wrong assumption?

 

Thanks!

 

 

 

 

 

 

1 ACCEPTED SOLUTION

AvdS
8,657 Views

Issue solved by adding 2 new disks, case closed Smiley Happy

 

Thanks for the help and suggestions

View solution in original post

8 REPLIES 8

GidonMarcus
8,856 Views

Hi

 

They might be not accessible rather really failed. in DS14 the disks are chained one to another and managed by individual modules. Try reseating the disks and the modules. And if not working swap disks around (preferably while ontap is halt) to exclude the bays / modules (there’s not Ontap dependency on disks location as they uses software assignment)

 

Gidi

Gidi Marcus (Linkedin) - Storage and Microsoft technologies consultant - Hydro IT LTD - UK

AvdS
8,844 Views

Hi Gidi, thanks for your reply

What do you mean exactly with reseating the modules?
Do you mean the disk with caddy?

 

PROACTsupport
8,825 Views

I think Gidi means reseating IOM-modules if reseating the disks does not solve the problem.

I would suggest running the 'led_on [diskname]' command prior to reseating the disks. This wil turn on the amber indicator on the disk you point out.

 

 

 

You could also try the 'disk unfail -s [diskname]'  command.

This will change the state of the failed disk to spare.

buraksenturk
8,801 Views

could you send us these commands results.

 

sysconfig -a

sysconfig -r

rdfile /etc/messages

AvdS
8,761 Views

Reseating the disks didnt help, same for reseating the modules.

I moved them to another location, which causes weird behaviour, before they were displayed as 0.0GB 0B/sect with serial number but after moving the serial number is gone also.

 

I cannot run the 'disk unfail command as I dont see the disks and I dont have the diskname to fail.

 

Will try to share some output the coming days.

 

 

buraksenturk
8,754 Views
You should replace with new disks.

AvdS
8,721 Views

Yeah, im going to get some refurbished disks

AvdS
8,658 Views

Issue solved by adding 2 new disks, case closed Smiley Happy

 

Thanks for the help and suggestions

Public