ONTAP Discussions

NFS Error Not Mount

Sebastian_Antunez
466 Views

I have configured an ontap 9.11.1 with NFS, when creating the volume and presenting it, it always gives me a permissions error. I have configured the following per cli

 

vserver nfs modify -vserver vserver_name -v3 enabled
vserver nfs modify -vserver vserver_name -v4.0 enabled
vserver nfs modify -vserver vserver_name -v4.1 enabled
vserver nfs modify -vserver vserver_name -tcp enabled
vserver nfs modify -vserver vserver_name -udp enabled
vserver nfs modify -vserver vserver_name -mount-rootonly disabled
vserver nfs modify -vserver vserver_name -nfs-rootonly disabled

vserver nfs modify -vserver vserver_name -showmount enabled

vserver export-policy create -policyname all_nfs -vserver nfs
vserver export-policy rule create -policyname all_nfs -clientmatch 0.0.0.0/0 -rorule any -rwrule any -superuser any -protocol nfs,nsf3,nfs4
vserver export-policy rule show -vserver nfs -policyname all_nfs
volume modify -volume Testing -vserver nfs -policy all_nfs

 

I need to be able to mount the volume, but the strangest thing is that a volume \! as the picture shows and check and is the nfs_root SVM

 

Thanks for your help

 

 

1 ACCEPTED SOLUTION

Ontapforrum
420 Views

Check this:


When using Windows NFS in Data ONTAP the following option should be set:

::> nfs server modify -vserver vservername -showmount enabled

::> nfs server modify -vserver vservername -v3-ms-dos-client enabled

::> nfs server modify -vserver vservername -enable-ejukebox false

::> nfs server modify -vserver vservername -v3-connection-drop disable

 

https://kb.netapp.com/Advice_and_Troubleshooting/Data_Storage_Software/ONTAP_OS/Unable_to_mount_ONTAP_NFS_export_from_Windows_NFS_Client

 

 

Mount failure with "Network Error - 53" on Native Windows NFS clients
https://kb.netapp.com/Advice_and_Troubleshooting/Data_Storage_Software/ONTAP_OS/Mount_failure_with_Network_Error_53_on_Native_Windows_NFS_clients

 

 

https://kb.netapp.com/Advice_and_Troubleshooting/Data_Storage_Software/ONTAP_OS/Windows_cannot_access_share_using_NFS_with_error_code_0x80070079

 

View solution in original post

3 REPLIES 3

TMACMD
449 Views

Window nfs is pretty much the worst nfs client there is. There are Few extra steps to perform in order to make it work with Microsoft. It doesn’t support anything higher than version 3. I don’t have the link handy but search the Netapp site for windows nfs

 

Ontapforrum
421 Views

Check this:


When using Windows NFS in Data ONTAP the following option should be set:

::> nfs server modify -vserver vservername -showmount enabled

::> nfs server modify -vserver vservername -v3-ms-dos-client enabled

::> nfs server modify -vserver vservername -enable-ejukebox false

::> nfs server modify -vserver vservername -v3-connection-drop disable

 

https://kb.netapp.com/Advice_and_Troubleshooting/Data_Storage_Software/ONTAP_OS/Unable_to_mount_ONTAP_NFS_export_from_Windows_NFS_Client

 

 

Mount failure with "Network Error - 53" on Native Windows NFS clients
https://kb.netapp.com/Advice_and_Troubleshooting/Data_Storage_Software/ONTAP_OS/Mount_failure_with_Network_Error_53_on_Native_Windows_NFS_clients

 

 

https://kb.netapp.com/Advice_and_Troubleshooting/Data_Storage_Software/ONTAP_OS/Windows_cannot_access_share_using_NFS_with_error_code_0x80070079

 

EWILTS_SAS
270 Views

One common error is forgetting about the export permissions on your root volume (probably vserver_name_root).  If you're trying to mount a junction path /Testing, make sure that / is also exported to your clients.

Public