Hi, I have installed NetApp Plugin for OEM 12c (126.96.36.199.1) for a Netapp vFiler used for SMO. "Database Storage Utilization" and "Consolidation Database Storage Performance" empty. "Database is not on NFS mounted storage. Hence, no views available." - a. We are using ASM lun created on NFS. Does this means it will not appear in the plugin report ? - b. If point a. is true, is there a way to make the data appear ? I had already verified the BELOW. Only for point 4, I observed MGMT$DB_DATAFILES."OS_STORAGE_ENTITY" is NA (even though the ASM disk is actually on a NFS mount) : 1. Database discovery is done in EM12c . 2. Go to the database “HOST” target in EM 12c and click on the host target on which database resides. From host target drop down, click on “Host-> StorageDetails”. It will launch the “Storage Details” page. Please refer attached screenshot. There is a table displayed on bottom of screen and click on “File Systems” tab and check that your discovered database storage mount point is shown there. (Please note that whenever you define new mount point on host, this list should reflect the change.), otherwise, Database Performance views will not work. This mount point discovery is updated periodically. (It might be possible that DB views are not working because this discovery might not have finished) 3. Please click on NetApp Storage Target type and go to “Target HomePage drop down ->All Metrics”. Please click on “Volume List” metric and confirm if the volume is listed there on which database resides. 4. If all above steps holds good, please execute the below query on EM 12c repository and send the result: SELECT V2.TARGET_NAME, V1.FILESYSTEM, SUBSTR(V1.FILESYSTEM,INSTR(V1.FILESYSTEM,':')+6, (CASE WHEN (INSTR(V1.FILESYSTEM,'/',1,3) > 0) THEN INSTR(V1.FILESYSTEM,'/',1,3) - INSTR(V1.FILESYSTEM,'/',1,2) - 1 ELSE 100 END)) "VOLUMENAME" FROM MGMT$STORAGE_REPORT_NFS V1, MGMT$DB_DATAFILES V2 WHERE V1.MOUNTPOINT = V2.OS_STORAGE_ENTITY and V2.TARGET_NAME=''