ONTAP Discussions

No link-light on FAS3250 cluster interconnects

mattmusgrove1
2,675 Views

Hi,

 

We are building a new 8.2.1 Cluster-Mode cluster with two FAS3250's.

 

We have connected c0a on FAS1 to c0a on FAS2 annd c0b on FAS1 to c0b on FAS2 but get no link-light and thus HA failover is not working.

 

I replaced cables and SFP's. I've tried straight-through and crossed fiber cables.

 

I've also tried connecting c0a to c0b on FAS1 to see if I get a link light and I don't.  Repeated on FAS2 and same result.

 

It's looking like a software misconfiguration rather than hardware.  Any suggestions gratefully received. 🙂

 

 

1 ACCEPTED SOLUTION

mattmusgrove1
2,669 Views

Solved ourselves.  We were using the wrong speed SFP's.  They have to be 10Gb.

View solution in original post

1 REPLY 1

mattmusgrove1
2,670 Views

Solved ourselves.  We were using the wrong speed SFP's.  They have to be 10Gb.

Public