ONTAP Cluster with two nodes and ISCSI

[oper]

Hello,

I have an Ontap Cluster with two nodes, each node has 2 aggregates. Volumes/Luns created over node 1 are visible by initiator, but volumes/luns created over node 2 are not visible in initiator.

From initiator I can ping lifs from node 2. 

Do you have any suggestion how can I troubleshoot this?

Best regards

[aborzenkov]

If you have cDOT, volumes are not presented by nodes - volumes are presented by SVM. You need to create data LIFs on second node and add them to SVM that contains those volumes.

[oper]

My svm have 1 lif for admin and 1 lif for each controller, total of 5 lifs. (admin, node1-ctrla, node1-ctrlb, node2-ctrla, node2-ctrlb). From initiator I can ping each one of these lifs... Only node1-ctrla acepts iscsi connection and return volumes owned by node1.

Regards,

[oper · Accepted solution]

Problem was related with windows configuration. After add MPIO feature and configure 4 sessions, one per each lif, windows could see 8 paths for 4 luns, and show only 4 disks in windows. 

Best Regards,

Rui

[tariku]

we have netapp 8060 doble controller in one chasis,we want to direct attach to server but on the controller port (e0e) interface no light also on the server FC interface.how to resolve this issue.