ONTAP Discussions

ONTAP Deployment on PCIe SSDs

views-count 542 Views

Hello, I need your help. I want to create a 2-node ONTAP Select 9.6RC1 (90-day Evaluation License) HA cluster on ESXi 6.7 for my test environment. This target will be used from the bare-metal Windows Server 2016. As bare-metal hosts, I use 2 Dell PowerEdge R730 servers:
- 2xCPU - Intel(R) Xeon(R) CPU E5-2683 v3 @ 2.00GHz;
- 128GB RAM;
- 1x 1TB HDD (for boot) ;
- 1x Intel NMVe DC P3700 (PCIe 2TB);
- 2x Mellanox Connectx-4 Lx 40GbE.
I have a bunch of questions.
1. Can I create the target on NVMe drives? Could you provide the manual on how that can be done? If there’s no way to use PCIe SSDs, where can I find any recommendations on the hardware that can be used to create a target?
2. What’s the lowest possible number of SATA or PCIe SSDs is needed in each server to ensure the highest possible target performance (I'm also curious about their minimal capacity)?

G2 Review Banner
All Community Forums