ONTAP Discussions

ONTAP Select - cluster creation failed - cannot find adapter 'Network adapter 1'

jagenau

Hi all,

 

I have been trying to deploy Ontap select on an ESXi 6.0 and I cannot create the Cluster.

 

To add and configure the host is possible.

 

 

 

 

 

(ONTAPdeploy) host add --host-id 172.17.7.157 --username xxx --password xyz --vcenter 172.17.10.99
Host: 172.17.7.157 Status: authentication_in_progress
(ONTAPdeploy) host show-all
+--------------+---------------+------+
| Host | Status | Type |
+--------------+---------------+------+
| 172.17.7.157 | authenticated | ESX |
+--------------+---------------+------+

(ONTAPdeploy) host configure --host-id 172.17.7.157 --location babylon --storage-pool local --internal-network Peer2Peer --management-network VMNet79 --data-network VMNet79
Host configuration updated for host: 172.17.7.157

(ONTAPdeploy) host show-all +--------------+------------+------+ | Host | Status | Type | +--------------+------------+------+ | 172.17.7.157 | configured | ESX | +--------------+------------+------+

 

 

 

 

(ONTAPdeploy) cluster create --name tron --cluster-mgmt-ip 172.17.79.31 --netmask 255.255.255.0 --gateway 172.17.79.1 --eval --node-names MCP --node-mgmt-ips 172.17.79.32 --node-hosts 172.17.7.157
ONTAP admin password:

 

 

 

(ONTAPdeploy) event show-all                                                                                                                  /
+----------+-------------------------+-------+------------------------------------------------------------------------------------------------/+----------------------------+
| category | type                    | level | detail                                                                                         /| time                       |
+----------+-------------------------+-------+------------------------------------------------------------------------------------------------/+----------------------------+
| cluster  | ClusterDeleteSuccessful | Info  | Cluster tron deleted successfully.                                                             /| 2016.09.12 11:05:47.726220 |
| cluster  | ClusterCreateFailed     | Error | ClusterNodeCreateFailed: One of the node create operations failed during cluster (tron) create./| 2016.09.12 11:05:44.804967 |
| cluster  | ClusterCreateAccepted   | Info  | Create request for cluster tron accepted.                                                      /| 2016.09.12 11:05:00.743536 |
| host     | HostConfigureSuccessful | Info  | Host 172.17.7.157 configuration successfully.                                                  /| 2016.09.12 11:03:58.522114 |
| host     | HostConfigureAccepted   | Info  | Add configuration request for host 172.17.7.157 accepted.                                      /| 2016.09.12 11:03:43.243048 |
| host     | HostAddSuccessful       | Info  | Host 172.17.7.157 added successfully.                                                          /| 2016.09.12 11:03:29.104244 |
| host     | HostAddAccepted         | Info  | Add request for host 172.17.7.157 accepted.                                                    /| 2016.09.12 11:03:24.786481 |

 

Here is the output from the log file 

/opt/netapp/log/sdotadmin_server.log

 

 

2016-09-12 11:03:24,749|DEBUG http://localhost:8000/api/v1/hosts/172.17.7.157 validating schema...
2016-09-12 11:03:24,775|DEBUG http://localhost:8000/api/v1/hosts/172.17.7.157 validating parameters...
2016-09-12 11:03:24,776|DEBUG Jsonifing http://localhost:8000/api/v1/hosts/172.17.7.157
2016-09-12 11:03:24,776|DEBUG Function Arguments: ['host_id', 'new_host']
2016-09-12 11:03:24,776|DEBUG Body parameter 'new_host' in function arguments
2016-09-12 11:03:24,794|DEBUG Getting data and status code
2016-09-12 11:03:24,794|DEBUG Got data and status code (202)
2016-09-12 11:03:24,819|DEBUG Getting data and status code
2016-09-12 11:03:24,819|DEBUG Got data and status code (202)
2016-09-12 11:03:25,906|DEBUG |client_api_helper.py|33:configure_rest_client| Setting config rest client to ESX
2016-09-12 11:03:26,194|DEBUG response body: {"host":"172.17.7.157"}
2016-09-12 11:03:29,095|DEBUG response body: []
2016-09-12 11:03:29,095|DEBUG |Host.py|171:verify_authentication| Host authentication successful using credential store
2016-09-12 11:03:34,879|DEBUG Jsonifing http://localhost:8000/api/v1/hosts
2016-09-12 11:03:34,879|DEBUG Function Arguments: []
2016-09-12 11:03:34,879|DEBUG Body parameter 'None' not in function arguments
2016-09-12 11:03:34,880|DEBUG Getting data and status code
2016-09-12 11:03:34,880|DEBUG Got data and status code (200)
2016-09-12 11:03:34,906|DEBUG Getting data and status code
2016-09-12 11:03:34,907|DEBUG Got data and status code (200)
2016-09-12 11:03:43,200|DEBUG http://localhost:8000/api/v1/hosts/172.17.7.157/configuration validating schema...
2016-09-12 11:03:43,227|DEBUG http://localhost:8000/api/v1/hosts/172.17.7.157/configuration validating parameters...
2016-09-12 11:03:43,228|DEBUG Jsonifing http://localhost:8000/api/v1/hosts/172.17.7.157/configuration
2016-09-12 11:03:43,228|DEBUG Function Arguments: ['host_id', 'new_configuration']
2016-09-12 11:03:43,228|DEBUG Body parameter 'new_configuration' in function arguments
2016-09-12 11:03:43,230|DEBUG |client_api_helper.py|33:configure_rest_client| Setting config rest client to ESX
2016-09-12 11:03:43,252|DEBUG Getting data and status code
2016-09-12 11:03:43,252|DEBUG Got data and status code (202)
2016-09-12 11:03:43,278|DEBUG Getting data and status code
2016-09-12 11:03:43,278|DEBUG Got data and status code (202)
2016-09-12 11:03:44,247|DEBUG |client_api_helper.py|33:configure_rest_client| Setting config rest client to ESX
2016-09-12 11:03:44,247|DEBUG |client_api_helper.py|33:configure_rest_client| Setting config rest client to ESX
2016-09-12 11:03:44,920|DEBUG Jsonifing http://localhost:8000/api/v1/hosts
2016-09-12 11:03:44,920|DEBUG Function Arguments: []
2016-09-12 11:03:44,920|DEBUG Body parameter 'None' not in function arguments
2016-09-12 11:03:44,921|DEBUG Getting data and status code
2016-09-12 11:03:44,921|DEBUG Got data and status code (200)
2016-09-12 11:03:44,948|DEBUG Getting data and status code
2016-09-12 11:03:44,948|DEBUG Got data and status code (200)
2016-09-12 11:03:45,984|DEBUG Jsonifing http://localhost:8000/api/v1/hosts
2016-09-12 11:03:45,984|DEBUG Function Arguments: []
2016-09-12 11:03:45,984|DEBUG Body parameter 'None' not in function arguments
2016-09-12 11:03:45,985|DEBUG Getting data and status code
2016-09-12 11:03:45,985|DEBUG Got data and status code (200)
2016-09-12 11:03:46,011|DEBUG Getting data and status code
2016-09-12 11:03:46,011|DEBUG Got data and status code (200)
2016-09-12 11:03:49,046|DEBUG Jsonifing http://localhost:8000/api/v1/hosts
2016-09-12 11:03:49,046|DEBUG Function Arguments: []
2016-09-12 11:03:49,047|DEBUG Body parameter 'None' not in function arguments
2016-09-12 11:03:49,047|DEBUG Getting data and status code
2016-09-12 11:03:49,047|DEBUG Got data and status code (200)
2016-09-12 11:03:49,090|DEBUG Getting data and status code
2016-09-12 11:03:49,090|DEBUG Got data and status code (200)
2016-09-12 11:03:50,889|DEBUG Jsonifing http://localhost:8000/api/v1/hosts
2016-09-12 11:03:50,889|DEBUG Function Arguments: []
2016-09-12 11:03:50,890|DEBUG Body parameter 'None' not in function arguments
2016-09-12 11:03:50,891|DEBUG Getting data and status code
2016-09-12 11:03:50,892|DEBUG Got data and status code (200)
2016-09-12 11:03:50,947|DEBUG Getting data and status code
2016-09-12 11:03:50,947|DEBUG Got data and status code (200)
2016-09-12 11:03:52,327|DEBUG Jsonifing http://localhost:8000/api/v1/hosts
2016-09-12 11:03:52,327|DEBUG Function Arguments: []
2016-09-12 11:03:52,327|DEBUG Body parameter 'None' not in function arguments
2016-09-12 11:03:52,328|DEBUG Getting data and status code
2016-09-12 11:03:52,328|DEBUG Got data and status code (200)
2016-09-12 11:03:52,355|DEBUG Getting data and status code
2016-09-12 11:03:52,355|DEBUG Got data and status code (200)
2016-09-12 11:03:54,087|DEBUG Jsonifing http://localhost:8000/api/v1/hosts
2016-09-12 11:03:54,087|DEBUG Function Arguments: []
2016-09-12 11:03:54,088|DEBUG Body parameter 'None' not in function arguments
2016-09-12 11:03:54,088|DEBUG Getting data and status code
2016-09-12 11:03:54,089|DEBUG Got data and status code (200)
2016-09-12 11:03:54,115|DEBUG Getting data and status code
2016-09-12 11:03:54,115|DEBUG Got data and status code (200)
2016-09-12 11:03:55,597|DEBUG response body: {"available_datastores":[{"allocation":988,"capacity":3429376,"name":"local","pdisks":["Local IBM Disk (naa.600605b00577f2f01f643c75301716c9)"],"pool_type":"VMFS","status":"Online"}],"available_networks":[{"name":"VMNet79","vlanid":"79","vswitch":"vSwitch0"},{"name":"VMNet10","vlanid":"1","vswitch":"vSwitch0"},{"name":"VMNet01","vlanid":"0","vswitch":"vSwitch0"},{"name":"Peer2Peer","vlanid":"0","vswitch":"vSwitch1"}],"available_pdisks":[{"adapter_name":"---","description":"Local USB Direct-Access ","name":"mpx.vmhba32:C0:T0:L0","total_diskspace":1911,"used_by":"---"},{"adapter_name":"vmhba3","description":"Local IBM Disk ","name":"naa.600605b00577f2f01f643c75301716c9","total_diskspace":3429412,"used_by":"local"}],"available_vms":[],"esxadmin_status":{"ESX_license":"VMware vSphere 6 Enterprise","SDK_version":"6.0.0","host":"172.17.7.157","server":"172.17.10.99","user":"xxx"},"host_configuration":{"host_hardware_config":{"cores_in_use":1,"cpu_mhz":"2499","mem_usage":"2753","memory_size":98276,"num_cpu_cores":"6","num_hbas":"8","num_nics":"7","processor_model":"Intel(R) Xeon(R) CPU E5-2640 0 @ 2.50GHz","product_ver":"VMware ESXi 6.0.0","vendor":"IBM"},"hypervisor_info":{"api_version":"6.0","bios_release_date":"2016-04-28T00:00:00Z","bios_version":"-[D7E152CUS-2.11]-","firewall_defaults_in":"blocked","firewall_defaults_out":"blocked","hyperthreading":"active","hypervisor":"VMware ESXi 6.0.0 Build-3825889","model":"IBM System x3550 M4 Server -[7914F2G]-","power_mgmt_policy":"High Performance","power_mgmt_technology":"ACPI P-states, ACPI C-states","reboot_required":"No","uuid":"941d75f9-2201-3855-b39e-1b93ab929fd8"},"network_adapters":[{"associated_vswitch":"vSwitch0","enabled":true,"mac":"6c:ae:8b:62:bc:ca","name":"vmnic0","speed":"1000","vendor":"Intel Corporation I350 Gigabit Network Connection"},{"associated_vswitch":"vSwitch0","enabled":true,"mac":"6c:ae:8b:62:bc:cb","name":"vmnic1","speed":"1000","vendor":"Intel Corporation I350 Gigabit Network Connection"},{"associated_vswitch":"None","enabled":false,"mac":"6c:ae:8b:62:bc:cc","name":"vmnic2","speed":"Unset","vendor":"Intel Corporation I350 Gigabit Network Connection"},{"associated_vswitch":"None","enabled":false,"mac":"6c:ae:8b:62:bc:cd","name":"vmnic3","speed":"Unset","vendor":"Intel Corporation I350 Gigabit Network Connection"},{"associated_vswitch":"vSwitch1","enabled":true,"mac":"a0:36:9f:87:20:60","name":"vmnic4","speed":"10000","vendor":"Intel Corporation Ethernet Controller 10 Gigabit X540-AT2"},{"associated_vswitch":"vSwitch1","enabled":true,"mac":"a0:36:9f:87:20:62","name":"vmnic5","speed":"10000","vendor":"Intel Corporation Ethernet Controller 10 Gigabit X540-AT2"}],"storage_adapters":[{"description":"(0000:00:1f.2) Patsburg 6 Port SATA AHCI Controller","logical_name":"vmhba0","product":"Patsburg 6 Port SATA AHCI Controller"},{"description":"(0000:1b:00.0) MegaRAID SAS Fusion Controller","logical_name":"vmhba3","product":"MegaRAID SAS Fusion Controller"},{"description":"(N\/A) USB Storage Controller","logical_name":"vmhba32","product":"USB Storage Controller"},{"description":"(0000:00:1f.2) Patsburg 6 Port SATA AHCI Controller","logical_name":"vmhba33","product":"Patsburg 6 Port SATA AHCI Controller"},{"description":"(0000:00:1f.2) Patsburg 6 Port SATA AHCI Controller","logical_name":"vmhba34","product":"Patsburg 6 Port SATA AHCI Controller"},{"description":"(0000:00:1f.2) Patsburg 6 Port SATA AHCI Controller","logical_name":"vmhba35","product":"Patsburg 6 Port SATA AHCI Controller"},{"description":"(0000:00:1f.2) Patsburg 6 Port SATA AHCI Controller","logical_name":"vmhba36","product":"Patsburg 6 Port SATA AHCI Controller"},{"description":"(0000:00:1f.2) Patsburg 6 Port SATA AHCI Controller","logical_name":"vmhba37","product":"Patsburg 6 Port SATA AHCI Controller"}],"vswitch_config":[{"associated_adapter":["vmnic1","vmnic0"],"available_ports":2418,"mtu":"1500","name":"vSwitch0","portgroups":["VMNet79","VMNet10","VMNet01","vMotion","Management Network"],"total_ports":2432},{"associated_adapter":["vmnic4","vmnic5"],"available_ports":2418,"mtu":"9000","name":"vSwitch1","portgroups":["Peer2Peer"],"total_ports":2432}]}}
2016-09-12 11:03:56,096|DEBUG Jsonifing http://localhost:8000/api/v1/hosts
2016-09-12 11:03:56,096|DEBUG Function Arguments: []
2016-09-12 11:03:56,096|DEBUG Body parameter 'None' not in function arguments
2016-09-12 11:03:56,097|DEBUG Getting data and status code
2016-09-12 11:03:56,097|DEBUG Got data and status code (200)
2016-09-12 11:03:56,124|DEBUG Getting data and status code
2016-09-12 11:03:56,124|DEBUG Got data and status code (200)
2016-09-12 11:03:57,111|DEBUG Jsonifing http://localhost:8000/api/v1/hosts
2016-09-12 11:03:57,111|DEBUG Function Arguments: []
2016-09-12 11:03:57,111|DEBUG Body parameter 'None' not in function arguments
2016-09-12 11:03:57,112|DEBUG Getting data and status code
2016-09-12 11:03:57,112|DEBUG Got data and status code (200)
2016-09-12 11:03:57,140|DEBUG Getting data and status code
2016-09-12 11:03:57,141|DEBUG Got data and status code (200)
2016-09-12 11:03:58,454|DEBUG Jsonifing http://localhost:8000/api/v1/hosts
2016-09-12 11:03:58,455|DEBUG Function Arguments: []
2016-09-12 11:03:58,455|DEBUG Body parameter 'None' not in function arguments
2016-09-12 11:03:58,456|DEBUG Getting data and status code
2016-09-12 11:03:58,457|DEBUG Got data and status code (200)2016-09-12 11:03:58,483|DEBUG Getting data and status code
2016-09-12 11:03:58,483|DEBUG Got data and status code (200)
2016-09-12 11:03:58,513|DEBUG response body: {"allocation":988,"capacity":3429376,"name":"local","pdisks":["Local IBM Disk (naa.600605b00577f2f01f643c75301716c9)"],"pool_type":"VMFS","status":"Online","vdisks":[]}
2016-09-12 11:03:58,514|DEBUG |Host.py|348:update_storage| Storage pool local exists on host 172.17.7.157
2016-09-12 11:04:01,624|DEBUG Jsonifing http://localhost:8000/api/v1/hosts
2016-09-12 11:04:01,624|DEBUG Function Arguments: []
2016-09-12 11:04:01,624|DEBUG Body parameter 'None' not in function arguments
2016-09-12 11:04:01,625|DEBUG Getting data and status code
2016-09-12 11:04:01,625|DEBUG Got data and status code (200)
2016-09-12 11:04:01,656|DEBUG Getting data and status code
2016-09-12 11:04:01,657|DEBUG Got data and status code (200)
2016-09-12 11:04:54,933|DEBUG http://localhost:8000/api/v1/clusters validating schema...
2016-09-12 11:04:54,961|DEBUG http://localhost:8000/api/v1/clusters validating parameters...
2016-09-12 11:04:54,962|DEBUG Jsonifing http://localhost:8000/api/v1/clusters
2016-09-12 11:04:54,962|DEBUG Function Arguments: ['new_cluster']
2016-09-12 11:04:54,962|DEBUG Body parameter 'new_cluster' in function arguments
2016-09-12 11:04:54,963|DEBUG |Cluster.py|224:read_cluster_json| Evaluating: True
2016-09-12 11:04:54,964|DEBUG |client_api_helper.py|33:configure_rest_client| Setting config rest client to ESX
2016-09-12 11:04:54,965|DEBUG |Cluster.py|113:generate_serial_number| Generated Eval Serial Number : 99887766554433221138
2016-09-12 11:04:54,965|DEBUG |client_api_helper.py|33:configure_rest_client| Setting config rest client to ESX
2016-09-12 11:04:57,755|DEBUG response body: {"code":13,"details":"<vmname> invalid - no vm named 'MCP' on host '172.17.7.157'","type":"InvalidArg"}
2016-09-12 11:04:57,755|DEBUG |client_api_helper.py|33:configure_rest_client| Setting config rest client to ESX
2016-09-12 11:05:00,732|DEBUG response body: {"allocation":988,"capacity":3429376,"name":"local","pdisks":["Local IBM Disk (naa.600605b00577f2f01f643c75301716c9)"],"pool_type":"VMFS","status":"Online","vdisks":[]}
2016-09-12 11:05:00,733|DEBUG |client_api_helper.py|57:get_storage_pool_capacity| Available Size of the Pool(local): 3428388
2016-09-12 11:05:00,753|DEBUG Getting data and status code
2016-09-12 11:05:00,753|DEBUG Got data and status code (202)
2016-09-12 11:05:00,779|DEBUG Getting data and status code
2016-09-12 11:05:00,779|DEBUG Got data and status code (202)
2016-09-12 11:05:01,747|DEBUG |client_api_helper.py|33:configure_rest_client| Setting config rest client to ESX
2016-09-12 11:05:04,071|DEBUG Jsonifing http://localhost:8000/api/v1/hosts
2016-09-12 11:05:04,071|DEBUG Function Arguments: []
2016-09-12 11:05:04,072|DEBUG Body parameter 'None' not in function arguments
2016-09-12 11:05:04,073|DEBUG Getting data and status code
2016-09-12 11:05:04,073|DEBUG Got data and status code (200)
2016-09-12 11:05:04,099|DEBUG Getting data and status code
2016-09-12 11:05:04,099|DEBUG Got data and status code (200)
2016-09-12 11:05:04,680|DEBUG response body: {"allocation":988,"capacity":3429376,"name":"local","pdisks":["Local IBM Disk (naa.600605b00577f2f01f643c75301716c9)"],"pool_type":"VMFS","status":"Online","vdisks":[]}
2016-09-12 11:05:04,681|DEBUG |client_api_helper.py|57:get_storage_pool_capacity| Available Size of the Pool(local): 3428388
2016-09-12 11:05:04,690|DEBUG |client_api_helper.py|33:configure_rest_client| Setting config rest client to ESX
2016-09-12 11:05:04,694| INFO |sdot_macgen.py|178:get_mac_external| generated mac: '00:A0:B8:91:01:00'
2016-09-12 11:05:04,725| INFO |sdot_macgen.py|178:get_mac_external| generated mac: '00:A0:B8:91:01:01'
2016-09-12 11:05:04,725|DEBUG |NodeConfig.py|62:create_data_disks| Data Disks Size received 1685094.4
2016-09-12 11:05:04,726|DEBUG |NodeConfig.py|188:update_node_config| VM Create JSON for node MCP is complete
2016-09-12 11:05:04,733| INFO |Cluster.py|1836:log_info| Cluster [tron]: creating nodes ...
2016-09-12 11:05:04,741| INFO |Cluster.py|1836:log_info| Cluster [tron]: db state set to deploying_nodes
2016-09-12 11:05:04,746|DEBUG |Cluster.py|1828:log_debug| Cluster [tron]: vm create json for node MCP: {u'Name': u'MCP', u'Storage': {u'RootDisks': [{u'SizeMB': 69632, u'Pool': u'local'}], u'CoreDisk': {u'SizeMB': 122880, u'Pool': u'local'}, u'DataDisks': [{u'SizeMB': 1685094.4, u'Pool': u'local'}], u'PropertyISO': {u'Pool': u'local'}, u'BootDisk': {u'Pool': u'local'}}, u'nodekey': u'tron_MCP', u'ONTAPImage': u'/opt/netapp/images/DataONTAPv-9.0RC2-esx.ova', u'GuestConfig': {u'NODE_MGMT_IP': u'172.17.79.32', u'BUILTIN_LICENSES': u'SGHLQDBBVAAAAAAAAAAAAAAAAAAA,MZTWTDBBVAAAAAAAAAAAAAAAAAAA,EBFARDBBVAAAAAAAAAAAAAAAAAAA,GMJWPDBBVAAAAAAAAAAAAAAAAAAA,WINPVDBBVAAAAAAAAAAAAAAAAAAA,AFWHTDBBVAAAAAAAAAAAAAAAAAAA,IDLEWDBBVAAAAAAAAAAAAAAAAAAA,OKYSSDBBVAAAAAAAAAAAAAAAAAAA,YTRLUDBBVAAAAAAAAAAAAAAAAAAA', u'CLUSTER_MGMT_NETMASK': u'255.255.255.0', u'NODE_UUID': u'c225c5be-78d8-11e6-82f7-005056b91e6e', u'CLUSTER_MGMT_IP': u'172.17.79.31', u'NODE_MGMT_GATEWAY': u'172.17.79.1', u'NODE_LOCATION': u'babylon', u'CLUSTER_NAME': u'tron', u'CLUSTER_MGMT_GATEWAY': u'172.17.79.1', u'ADMIN_PASSWORD': u'changeme123', u'SERIAL_NUMBER': u'99887766554433221138', u'CLUSTER_UUID': u'c22461ba-78d8-11e6-82f7-005056b91e6e', u'NODE_MGMT_NETMASK': u'255.255.255.0', u'NODE_COUNT': 1, u'CLUSTER_CREATE': u'TRUE'}, u'CpuCount': 4, u'SerialPorts': [{u'PortName': u'console'}, {u'PortName': u'debug'}], u'MemsizeMB': 16384, u'NetworkInterfaces': [{u'MACAddress': u'00:A0:B8:91:01:00', u'Network': u'VMNet79'}, {u'MACAddress': u'00:A0:B8:91:01:01', u'Network': u'VMNet79'}]}
2016-09-12 11:05:04,747|DEBUG |Cluster.py|1828:log_debug| Cluster [tron]: node MCP to be created and started
2016-09-12 11:05:04,747|DEBUG |client_api_helper.py|33:configure_rest_client| Setting config rest client to ESX
2016-09-12 11:05:06,959|DEBUG Jsonifing http://localhost:8000/api/v1/events
2016-09-12 11:05:06,959|DEBUG Function Arguments: ['count']
2016-09-12 11:05:06,960|DEBUG Body parameter 'None' not in function arguments
2016-09-12 11:05:06,965|DEBUG Getting data and status code
2016-09-12 11:05:06,965|DEBUG Got data and status code (200)
2016-09-12 11:05:07,001|DEBUG Getting data and status code
2016-09-12 11:05:07,001|DEBUG Got data and status code (200)
2016-09-12 11:05:15,407|DEBUG Jsonifing http://localhost:8000/api/v1/events
2016-09-12 11:05:15,408|DEBUG Function Arguments: ['count']
2016-09-12 11:05:15,408|DEBUG Body parameter 'None' not in function arguments
2016-09-12 11:05:15,413|DEBUG Getting data and status code
2016-09-12 11:05:15,413|DEBUG Got data and status code (200)
2016-09-12 11:05:15,467|DEBUG Getting data and status code
2016-09-12 11:05:15,467|DEBUG Got data and status code (200)
2016-09-12 11:05:20,035|DEBUG Jsonifing http://localhost:8000/api/v1/events
2016-09-12 11:05:20,036|DEBUG Function Arguments: ['count']
2016-09-12 11:05:20,036|DEBUG Body parameter 'None' not in function arguments
2016-09-12 11:05:20,046|DEBUG Getting data and status code
2016-09-12 11:05:20,046|DEBUG Got data and status code (200)
2016-09-12 11:05:20,090|DEBUG Getting data and status code
2016-09-12 11:05:20,091|DEBUG Got data and status code (200)
2016-09-12 11:05:24,779| INFO |Cluster.py|1836:log_info| Cluster [tron]: node create tasks are still running ... (completed tasks [0] of [1])
2016-09-12 11:05:33,204|DEBUG response body: {"code":51,"details":"Error during configuration of vnics:\n [13] InvalidArg: <adapter_name> invalid - cannot find adapter 'Network adapter 1'\n","type":"VmConfigErr"}
2016-09-12 11:05:33,204|ERROR |client_api_helper.py|100:vm_create| Error during configuration of vnics:
 [13] InvalidArg: <adapter_name> invalid - cannot find adapter 'Network adapter 1'

2016-09-12 11:05:33,204|ERROR |client_api_helper.py|101:vm_create| Error: NodeCreateFailed: Node (MCP) create failed on host (172.17.7.157).
2016-09-12 11:05:44,804| INFO |Cluster.py|1836:log_info| Cluster [tron]: node create tasks are still running ... (completed tasks [0] of [1])
2016-09-12 11:05:44,804|ERROR |Cluster.py|1832:log_error| Cluster [tron]: one or more of node create tasks failed, initiating rollback
2016-09-12 11:05:44,804|ERROR |cluster_tasks.py|177:create_nodes| Error: ClusterNodeCreateFailed: One of the node create operations failed during cluster (tron) create.
2016-09-12 11:05:44,804|ERROR |cluster_tasks.py|85:create_cluster| [tron] cluster create failed with error: [Error: ClusterNodeCreateFailed: One of the node create operations failed during cluster (tron) create.]
2016-09-12 11:05:44,828| INFO |Cluster.py|1836:log_info| Cluster [tron]: db state set to create_failed
2016-09-12 11:05:44,828| INFO |cluster_tasks.py|108:create_cluster| rollback of failed cluster (tron)
2016-09-12 11:05:44,829|DEBUG |client_api_helper.py|33:configure_rest_client| Setting config rest client to ESX
2016-09-12 11:05:47,705|DEBUG response body: {"code":13,"details":"<vmname> invalid - no vm named 'MCP' on host '172.17.7.157'","type":"InvalidArg"}
2016-09-12 11:05:47,705| INFO |Cluster.py|1840:log_warn| Cluster [tron]: vm (MCP) not found, may be deleted already ({"code":13,"details":"<vmname> invalid - no vm named 'MCP' on host '172.17.7.157'","type":"InvalidArg"})
2016-09-12 11:05:47,711| INFO |sdot_macgen.py|286:remove_mac| '00:A0:B8:91:01:00' DELETED
2016-09-12 11:05:47,716| INFO |sdot_macgen.py|286:remove_mac| '00:A0:B8:91:01:01' DELETED
2016-09-12 11:05:47,735| INFO |Cluster.py|1836:log_info| Cluster [tron]: all nodes in cluster are deleted, deleting cluster db
2016-09-12 11:05:47,744| INFO |Cluster.py|1836:log_info| Cluster [tron]: cluster (tron) deleted
2016-09-12 11:06:01,361|DEBUG Jsonifing http://localhost:8000/api/v1/events
2016-09-12 11:06:01,361|DEBUG Function Arguments: ['count']
2016-09-12 11:06:01,361|DEBUG Body parameter 'None' not in function arguments
2016-09-12 11:06:01,368|DEBUG Getting data and status code
2016-09-12 11:06:01,368|DEBUG Got data and status code (200)
2016-09-12 11:06:01,407|DEBUG Getting data and status code
2016-09-12 11:06:01,407|DEBUG Got data and status code (200)

It seems to be a problem with the vm network adapter.

 

InvalidArg: <adapter_name> invalid - cannot find adapter 'Network adapter 1'

 

Please help me.

 

Thanks in advance.

 

1 REPLY 1

boudjel38

hi,

 

i have the same probleme

 

any help please ?

 

much appreciated

 

Announcements
NetApp on Discord Image

We're on Discord, are you?

Live Chat, Watch Parties, and More!

Explore Banner

Meet Explore, NetApp’s digital sales platform

Engage digitally throughout the sales process, from product discovery to configuration, and handle all your post-purchase needs.

NetApp Insights to Action
I2A Banner
Public