Hi Shylendradi,
How many disks you are going to add in to your aggregate ???? And Is your OnTap 7-Mode or Cluster Mode ????
Remeber that there is minimum requirement of Disk to create a FLASH POOL
FAS3100 and FAS3200 min requirement is 3+2 ( 3 data + 2 Parity )
FAS6000 and FAS6200 is 9+2 ( 9 Data + 2 Parity )
Step 1:- You Need to enable Hybrid on your aggregate in order to have flash pool
7- Mode
aggr options aggr_name hybrid_enabled on
Cluster Mode
storage aggregate modify -aggregate aggr_name -hybrid_enabled true
Step 2:- Now you can add disks using their DISK ID's , If you have more than one Raid Group you have to choose which RG
7-Mode
aggr add aggr_name -T SSD 6@100
cluster Mode
storage aggregate add-disks -aggregate aggr-name -disktype SSD -diskcount 3
You can verify If it is enabled as below
7-Mode
aggr status -v aggr_name
Cluster Mode
storage aggregate show -aggregate aggr_name
Once done now you need to create READ or WRITE policies in the Aggregate , Please follow the guide to create policies
http://www.netapp.com/us/system/pdf-reader.aspx?m=tr-4070.pdf&cc=us
Hope it helps 🙂
Thanks,
Nayab