Hi
I am currently implementing Snapmirror over FC and am having issues replicating the data, the replication works over FC if I add the below setting into the snapmirror.conf file at the destination and change the source name to the connection name I have created.
#Regenerated by registry Tue Jul 3 15:56:30 GMT 2012
CRS_Test = multi(192.168.1.1,192.168.1.3)
CRS_Test:vol_test_cifs SAN-CRS-FAS01:vol_test_cifs_FC_test4 - - - - -
The main issues is that everytime we go to set up a new snapmirror replication it starts to push ot over the ethernet network and not the FC network, I have tried to dedicated the ports through snapmirror.access
Controller 1 - snapmirror.access host=192.168.1.1-ql5a
Controller 2 - snapmirror.access host=192.168.1.3-ql5a
Please correct me if this is wrong
I have made sure that the controllers are added to the snapmirror.allow and hosts files
Controller 1
snapmirror.allow
SAN-THC-FAS01
SAN-THC-FAS02
SAN-CRS-FAS02
fc0SAN-THC-FAS01
fc1SAN-THC-FAS01
192.168.1.1
Hosts
#Auto-generated by setup Mon Jul 2 12:19:51 BST 2012
127.0.0.1 localhost localhost-stack
127.0.10.1 localhost-10 localhost-bsd
127.0.20.1 localhost-20 localhost-sk
10.6.20.23 SAN-CRS-FAS01 SAN-CRS-FAS01-VIF1
10.6.171.43 SAN-CRS-FAS01-VIF2
10.6.20.25 SAN-CRS-FAS01-VIF3
192.168.1.3 fc0SAN-CRS-FAS01 # ql5a
192.168.2.3 fc1SAN-CRS-FAS01 # ql5b
10.6.170.18 SAN-CRS-FAS01-e0M
# 0.0.0.0 SAN-CRS-FAS01-e0P
# 0.0.0.0 SAN-CRS-FAS01-e1a
# 0.0.0.0 SAN-CRS-FAS01-e1b
192.168.1.1 fc0SAN-THC-FAS01 # ql5a
192.168.2.1 fc1SAN-THC-FAS01 # ql5b
10.1.49.8 relay.lbcamden.net mailhost
Controller 2
snapmirror.allow
SAN-CRS-FAS02
SAN-CRS-FAS01
SAN-THC-FAS02
SAN-CRS-FAS01:vol_test_cifs
fc0SAN-CRS-FAS01
fc1SAN-CRS-FAS01
192.168.1.3
hosts
#Auto-generated by setup Mon Jul 2 12:17:29 BST 2012
127.0.0.1 localhost localhost-stack
127.0.10.1 localhost-10 localhost-bsd
127.0.20.1 localhost-20 localhost-sk
10.128.20.27 SAN-THC-FAS01 SAN-THC-FAS01-VIF1
10.128.171.43 SAN-THC-FAS01-VIF2
10.128.20.28 SAN-THC-FAS01-VIF3
192.168.1.1 fc0SAN-THC-FAS01 # ql5a
192.168.2.1 fc1SAN-THC-FAS01 # ql5b
10.128.170.18 SAN-THC-FAS01-e0M
# 0.0.0.0 SAN-THC-FAS01-e0P
# 0.0.0.0 SAN-THC-FAS01-e1a
# 0.0.0.0 SAN-THC-FAS01-e1b
192.168.1.3 fc0SAN-CRS-FAS01 # ql5a
192.168.2.3 fc1SAN-CRS-FAS01 # ql5b
10.103.6.15 relay.lbcamden.net mailhost
But I keep getting the error 13102 (could not read from socket), does anyone have any idea how I can setup these controllers up so they only use the FC ports for Snapmirror traffic and that when the customer creates new snapmirror relationships they also use the FC network.
Thanks in advance
Regards
Mark
