ONTAP Discussions

Total IOPS

tyrone_owen_1
13,174 Views

Hi,

 

I want to get a breakdown of the total read/write/other IOPS over a specific period, say 24 hours or a week for example. OCUM only seems to provide avg/min/max - is there a way to get the total performance data I want a different way?

 

Thanks

1 ACCEPTED SOLUTION

robverhoeven
13,075 Views

Hi,

 

I think NetApp Harvest or NABox can help out here. Check https://nabox.org for more details.

 

Cheers,

Rob

View solution in original post

18 REPLIES 18

Mjizzini
13,036 Views

You will find the QOS commands useful to what you are looking for.

QOS commands

 

 

tyrone_owen_1
13,024 Views

Thanks very much for the reply.

 

Doesn't the qos command provide current statistics as opposed to a total over a 24 hour/week period?

robverhoeven
13,076 Views

Hi,

 

I think NetApp Harvest or NABox can help out here. Check https://nabox.org for more details.

 

Cheers,

Rob

tyrone_owen_1
13,002 Views

Thanks Rob, that looks interesting - why would I use it over OCUM?

 

Looking at the screen shots I see avg/max/min IOPS and not total IOPS broken down into r/w/o for a given period.

 

pedro_rocha
12,992 Views

I normally prefer to investigate performance related events through Grafana (NAbox) graphs. AIQUM is very nice though.... I think it's more a personal preference because once you get used to AIQUM, you do almost the same tasks in terms of analyzing graphs and etc.

 

If you don't ever used NAbox, you should give it a try. It looks faster and more fluid to pin point those IOPS/latency/Throughtput events using graphs and different time frames.

 

Regards,

Pedro.

tyrone_owen_1
12,989 Views

Hi,

 

I'm not investigating a performance issue.

 

Just to restate the request: is there any way for me to establish the Total read/write/other IOPS for a defined period? Preferably using native tools, e.g. CLI, OCUM....

 

Thanks

pedro_rocha
12,986 Views

The below image is from AIQUM 9.7. Is this what you want?

 

pedro_rocha_0-1605793859088.png

 

 

If so, in AIQUM you can do it for the SVM, volume, LUN... not for a cluster or node. I think that you can do it for the node/cluster on NAbox.

 

Or do you want it in a text format?

tyrone_owen_1
12,966 Views

Thanks for the reply.

 

So from the diagram, what is the total IOPS for the 16th November?

pedro_rocha
12,927 Views

Hello

 

you'd need to hover the mouse to that date in the histogram, or choose the specific date
 

tyrone_owen_1
12,782 Views

But it doesn't give you the total IOPS for a 24 hour or weekly period. It gives you the total IOPS for a specific time  which is not what I am asking for.

 

Total IOPS broken down into read/write/other for a period of time, e.g. 24 hours, a week, etc. And  not total IOPS for a specific time

pedro_rocha
12,769 Views

Hello my friend,

 

Is this what you want?

 

pedro_rocha_0-1606136275299.png

 

Regards,

Pedro.

tyrone_owen_1
12,755 Views

Hi Pedro,

 

That looks like it could be it - that's not a native NetApp tool though is it?

 

Thanks

pedro_rocha
12,752 Views

Hi,

 

Unfortunately I do not know... maybe someone else here could say.

 

You could also open a support ticket to check.

 

As I said before, nabox worth the try...

 

Good luck!

ttran
12,698 Views

Hi Tyrone_owen_1,

 

The screenshot @pedro_rocha provided is captured from a NAbox deployment that @robverhoeven suggested earlier in the thread. NAbox leverages NetApp Harvest, Graphite, and GrafanaLabs to provide a customizable holistic view. Harvest is the data collector, Graphite is the metrics database, and Grafana provides the dashboards.

 

There is a short intro video, screenshots and everything you need to setup NAbox .

 

 

Regards,

 

Team NetApp

Team NetApp

tyrone_owen_1
12,678 Views

Just to confirm then, as no-one has said specifically, there is no way to do this with native NetApp tooling?

Alma
9,391 Views

In OCUM there is no presentation of the total IOPS for a period of time - like 24 hours. However in the zoom view shown above you will get the average of the IOPS over the period of time. That can be used to calculate the total IOPS as (average IOPS * number of seconds in the period of time of interest). This number will grow quickly with the length of the period of time. For this reason, i.e., avoid large numbers, OCUM shows only averages of IOPS.

 

For 72 hour period there is an inventory page that lists all the volumes and displays the average IOPS - again from there one can calculate the total IOPS for 72 hours.

tyrone_owen_1
9,384 Views

Thanks for the response.

 

Unless I am missing something, your calculation assumes that the average IOPs for every second during a given period is absolutely consistent, which in many systems I'm sure this is the case.

Alma
9,378 Views

the average you see in the zoomed graph - together with min max and 95th percentile - is the average of the IOPS value every measurement point in the period of time - so the differences in IOPS in that period of time are already captured by that average number

 

average = (sum of IOPS every point in time) / (total points in time)

 

Since you are looking for sum of IOPS across all points in time, average can be used to stretch that number across every second of the period of time of interest.

 

 

 

 

Public